Available Options
The 918D-IS-SL Fiber Optic Detector uses a symmetrical integrating sphere design to ensure the most accurate calibration possible, regardless of the fiber type measured. The 918D-IS-SL uses a single Silicon detector and is calibrated over the range of 410-1100 nm. The calibration data is encoded in a calibration module integral to the electrical connector. The 918D-IS-SL has an integral DB15 connector and is compatible with Newport's new power meters. Maximum versatility is provided by the detector’s dual port design. A variety of adaptors for connector-terminated fibers are provided, and plug into the detector’s front port. The rear port is designed to measure light from straight and angle cleaved bare fibers, using Newport’s FP3-FH1 bare fiber holder. A complete kit of adaptors, including the FP3-FH1, is included with each detector, together with a rugged carrying case.
feature | |
Calibration Uncertainty without Attenuator | 5% @ 410-640nm, 3% @ 641-1100 nm |
Clear Aperture | 2.5 mm |
Connector Type | DB15 |
Detector Type | Fiber Optic |
Linearity | ±0.5 % |
Material | Silicon |
Maximum Measurable Power | 30 W/cm2 |
Maximum Power Density | 30.0 |
Maximum Pulse Energy Without Attenuator | 100 µJ |
Operating Temperature Range | 5 to 50°C, <70% RH |
Power Range | 1 nW - 200 mW |
Rise Time | ≤2 µs |
RoHS | Compliant |
Spectral Range | 410 - 1100 nm |
Sphere Size | 1 in. |