The 91150-KG3 Reference Cell and Meter is an integral part of solar simulator calibration and solar cell I-V characterization. It consists of a readout device and a 2 x 2 cm calibrated solar cell made of monocrystalline silicon with KG3 window. The cell is also equipped with a thermocouple assembled..
$2,908.00
Ex Tax:$2,908.00
The 91150-KG5 Reference Cell and Meter is an integral part of solar simulator calibration and solar cell I-V characterization. It consists of a readout device and a 2 x 2 cm calibrated solar cell made of monocrystalline silicon with KG5 window. The cell is also equipped with a thermocouple assembled..
$3,344.00
Ex Tax:$3,344.00
The 91150V Reference Cell and Meter is an integral part of solar simulator calibration and solar cell I-V characterization. It consists of a readout device and a 2 x 2 cm calibrated solar cell made of monocrystalline silicon and a fused silica window. The cell is also equipped with a thermocouple as..
$3,081.00
Ex Tax:$3,081.00
The SRCERT certification service prolongs the lifetime of any reference detector whose spectral responsivity is used for calibrated measurements. This can be applied to most of the flange-mount series detectors, as well as the references used in the QEPVSI-B and QuantX QE systems...
$0.00
Ex Tax:$0.00
The STPVCERT certification service prolongs the lifetime of the Oriel 91150V reference cell and meter. Newport recommends an annual certification for this device in order to ensure accuracy with sensitive measurements under an Oriel solar simulator...
$0.00
Ex Tax:$0.00
Provides temperature control for the device under test as well as vacuum positioning capability when used for IV measurements using any Oriel Sol3A, Sol2A, or Sol1A solar simulators and IV test station. The rail mounted design incorporates positions for up to a 6x6 sample and a calibrated solar ref..
$81.00
Ex Tax:$81.00
The PVIV-CHILLER is a circulating water bath heater and chiller, compatible with Oriel I-V test stations and Quantum Efficiency Measurement Systems. This chiller enables temperature control and stability of the sample under test when these test stations and measurement systems are used. It is mandat..
$4,496.00
Ex Tax:$4,496.00
The PVIV-VAC-CHUCK is a height adjustable vacuum plate, capable of mounting photovoltaic cells sized from 2 inches x 2 inches through 6 inches x 6 inches. A vacuum pump is required to secure a sample under test, sold separetely...
$1,845.00
Ex Tax:$1,845.00
The Oriel® PVIV-1A Test Station runs I-V measurements and calculates critical parameters such as short circuit current (Isc), current density (Jsc), open circuit voltage (Voc), fill factor (ff), maximum output power (Pmax), cell efficiency (η), and other standard photovoltaic cell parameters. The st..
$0.00
Ex Tax:$0.00
The Oriel® PVIV-10A Test Station runs I-V measurements and calculates critical parameters such as short circuit current (Isc), current density (Jsc), open circuit voltage (Voc), fill factor (ff), maximum output power (Pmax), cell efficiency (η), and other standard photovoltaic cell parameters. The s..
$12,299.00
Ex Tax:$12,299.00
The Oriel® PVIV-3A Test Station runs I-V measurements and calculates critical parameters such as short circuit current (Isc), current density (Jsc), open circuit voltage (Voc), fill factor (ff), maximum output power (Pmax), cell efficiency (η), and other standard photovoltaic cell parameters. The st..
$0.00
Ex Tax:$0.00
The Oriel® PVIV-5A Test Station runs I-V measurements and calculates critical parameters such as short circuit current (Isc), current density (Jsc), open circuit voltage (Voc), fill factor (ff), maximum output power (Pmax), cell efficiency (η), and other standard photovoltaic cell parameters. The st..
$10,986.00
Ex Tax:$10,986.00