The SPH-UDAPT Adapter allows the 1 inch port of the 819C/D series integrating spheres to be connected to Oriel's standard 1.5 inch female flange and the 1 inch Lens Tube components. The outside of the adapter is Oriel's male flange adapter, while the inside also threaded with the standard 1.035-40 ..
$141.00
Ex Tax:$141.00
The 819M-DAT Detector Adaptor is used to attach an 818, 918 or 918D Series detector to the 1 inch port of an 819C/D Series integrating sphere. Screw the adapter on the detector and then mount the assembly on the port. In general, the detector should be mounted at a port where it does not directly ..
$259.00
Ex Tax:$259.00
The 819M-BASE Base Plate is used to mount 819C or 819D Series integrating spheres. Its dimensions are 6 x 6 x 0.40 inch. It features 4 holes for ¼-20 screws with 5 inches apart for the Imperial breadboard pattern, 4 holes for M6 screws with 100 mm apart for the metric breadboard pattern, and ..
$128.00
Ex Tax:$128.00
The 819-DA Detector Adapter allows 818 Series Detectors to be connected to a 1 inch port of an 819 Series Integrating Sphere...
$91.00
Ex Tax:$91.00
The 819M-CM-1.0 is a female C-mount (1-32 thread) adapter mounted to the 1 inch port of the 819C or 819D series integrating spheres. The C-mount thread is commonly adopted in cameras and other optical instruments...
$252.00
Ex Tax:$252.00
The 819M-B-11-1.0 is a C-mount (1-32 UN 2A) male adpater. It has a clear aperture of 11 mm, and inside the adapter has a barium sulfate coating...
$271.00
Ex Tax:$271.00
The 819M-SAM-1.0 Sample Holder attaches to a 1 inch port on a 819C or 819D Series integrating sphere. It holds the sample external to the integrating sphere...
$595.00
Ex Tax:$595.00
The 819M-SM1-1.0 is an adapter that connects to a 1 inch port on a 819C or 819D Series integrating sphere with an SM1 (1.035-40) thread. Use this part to connect to a broad range of Newport’s Lens Tube fixtures...
$265.00
Ex Tax:$265.00
Showing 1 to 8 of 8 (1 Pages)