The 13950 Shielded Cuvette Holder holds standard 10 x 10 mm cuvettes atop an optical rod. It has an 8 mm wide by 29 mm high rectangular aperture on all four sides. When viewing or detecting fluorescence or other signal through the sides of the cell, the apertures minimize reflected or scattered ligh..
$186.00
Ex Tax:$186.00
The 13955 Cuvette is made from UV grade fused silica and transmits down to 200 nm. All four windows on the 10 x 10 x 45 mm cuvette and the base are polished. It is supplied with a sealed Teflon cover to prevent spills.10 x 10 cells are used for fluorescence, scattering and absorbance measurements..
$249.00
Ex Tax:$249.00
The 13960 Cuvette is made from UV grade fused silica and transmits down to 200 nm. All four windows on the 10 x 10 x 45 mm cuvette and the base are polished. It is supplied with a Teflon cover.10 x 10 cells are used for fluorescence, scattering and absorbance measurements..
$221.00
Ex Tax:$221.00
The 13965 Cuvette is made from UV grade fused silica and transmits down to 200 nm. All four windows and the base on the 3 x 3 x 40 mm cuvette are polished. It is supplied with a Teflon cover. 3 mm x 3 mm cells are good for fluorescence studies...
$231.00
Ex Tax:$231.00
The 13961 Cuvette is made from optical grade glass. All four windows on the 10 x 10 x 45 mm cuvette and the base are polished. It is supplied with a Teflon cover.10 x 10 cells are used for fluorescence, scattering and absorbance measurements..
$139.00
Ex Tax:$139.00
The 78101 Port Cover is used to cover a port on a 78100 Sample Compartment...
$45.00
Ex Tax:$45.00
The 78100 Sample Compartment holds 10 x 10 x 45 mm cuvettes in an optical beam path to conduct sample analysis. The 1.5-inch series flanges couple to Oriel spectrographs, detectors and accessories. The interior baffle design of the 78100 prevents light from reaching the output without going through ..
$1,358.00
Ex Tax:$1,358.00
Showing 1 to 7 of 7 (1 Pages)