The LT10-UADPT is a mechanical flange used to couple Oriel Instruments 1.5 inch flange series products to 1 inch Lens Tube series products. One end features an opening with 1.035-40 internal threads, while the other end is a 1.5-Inch Oriel female flange. This adapter features a 1.0 inch clear apert..
$80.00
Ex Tax:$80.00
The LT10-UADPT is a mechanical flange used to couple Oriel Instruments 1.5 inch flange series products to 1 inch Lens Tube series products. One end features an opening with 2.035-40 internal threads, while the other end is a 1.5-Inch Oriel female flange. This adapter features a 1.0 inch clear apert..
$86.00
Ex Tax:$86.00
The 78816 Flange Converter converts a male C-Flange to female standard flange. 1.5 Inch Series...
$112.00
Ex Tax:$112.00
The 66292 Flange Step Down Adapter has a 2 Inch Series male flange on one end and a 1.5 Inch Series Female flange on the other. It allows you to take advantage of our wider selection of 1.5 Inch Series accessories. Keep in mind that there will be power loss from a collimated beam due to the reducti..
$125.00
Ex Tax:$125.00
The 66290 Flange Step Down Adapter has a 3 Inch Series male flange on one end and a 1.5 Inch Series female flange on the other. It allows you to take advantage of our wider selection of 1.5 Inch Series accessories. Keep in mind that there will be power loss from a collimated beam due to the reducti..
$153.00
Ex Tax:$153.00
The 77829 Light Source Coupling Ring has 1.5 Inch Series female connections on both ends. This set screw type uses three set screws to hold both flanged components together. The set screws are 6-32 cone point type. They use a 1/16 inch hex wrench...
$86.00
Ex Tax:$86.00
The 77791 Light Source Coupling Ring has 1.5 Inch Series female connections on both ends. This Quick Connect model is very convenient to use. Just snap in the two flanged components and they're held firmly. A thumbscrew locks them in place so there is no fiddling with set screws and Allen wrenches. ..
$122.00
Ex Tax:$122.00
The 77792 Light Source Coupling Ring has 1.5 Inch Series male connections on both ends. This Quick Connect model is very convenient to use. Just snap in the two flanged components and they're held firmly. A thumbscrew locks them in place so there is no fiddling with set screws and Allen wrenches. Th..
$75.00
Ex Tax:$75.00
The 77790 Flange Converter converts a 1.5 Inch Series set screw type female flange, into a Quick Connect female flange. Use it on any female flanged component that requires frequent interchange of accessories. Please note that the clear aperture is reduced to 1.2 inches (30 mm)...
$254.00
Ex Tax:$254.00
Showing 1 to 9 of 9 (1 Pages)