The FRG-KT Frequency-Resolved Optical Gating (FROG) kit is based on the setup used in Newport Application Note 33 - Amplitude and Phase Characterization of Ultrashort Laser Pulses which describes the technique known as frequency-resolved optical gating (FROG). FROG is a technique that can be employ..
$0.00
Ex Tax:$0.00
The M-FRG-KT FROG kit is based on the setup used in Newport Application Note 33 - Amplitude and Phase Characterization of Ultrashort Laser Pulses which describes the technique known as frequency-resolved optical gating (FROG). FROG is a technique that can be employed in a variety of experimental ge..
$11,262.00
Ex Tax:$11,262.00
The CONEX-LDS-AOC is a 5m analog output cable for the CONEX-LDS which can be used for closed loop on a beam or gathering angular position data...
$266.00
Ex Tax:$266.00
The CONEX-LDS electronic autocollimator with integrated controller performs high-resolution angular measurements for alignment, quality assurance and metrology applications. Featuring a highly collimated, 670 nm laser diode, the CONEX-LDS allows for high resolution non-contact measurements over long..
$13,579.00
Ex Tax:$13,579.00
The CONEX-LDS-PS is a 90/264 VAC, 50/60 HZ,30VA auto-ranging power supply for the CONEX-LDS Autocollimator...
$51.00
Ex Tax:$51.00
The 91150-KG3 Reference Cell and Meter is an integral part of solar simulator calibration and solar cell I-V characterization. It consists of a readout device and a 2 x 2 cm calibrated solar cell made of monocrystalline silicon with KG3 window. The cell is also equipped with a thermocouple assembled..
$2,908.00
Ex Tax:$2,908.00
The 91150-KG5 Reference Cell and Meter is an integral part of solar simulator calibration and solar cell I-V characterization. It consists of a readout device and a 2 x 2 cm calibrated solar cell made of monocrystalline silicon with KG5 window. The cell is also equipped with a thermocouple assembled..
$3,344.00
Ex Tax:$3,344.00
The 91150V Reference Cell and Meter is an integral part of solar simulator calibration and solar cell I-V characterization. It consists of a readout device and a 2 x 2 cm calibrated solar cell made of monocrystalline silicon and a fused silica window. The cell is also equipped with a thermocouple as..
$3,081.00
Ex Tax:$3,081.00
The SRCERT certification service prolongs the lifetime of any reference detector whose spectral responsivity is used for calibrated measurements. This can be applied to most of the flange-mount series detectors, as well as the references used in the QEPVSI-B and QuantX QE systems...
$0.00
Ex Tax:$0.00
The STPVCERT certification service prolongs the lifetime of the Oriel 91150V reference cell and meter. Newport recommends an annual certification for this device in order to ensure accuracy with sensitive measurements under an Oriel solar simulator...
$0.00
Ex Tax:$0.00
The CONEX-LDS-VER Verification Kit includes a calibrated optical wedge fitted into a mechanical mount and all associated clamps and rods. The slide is delivered with a calibration certificate which provides the value of angular deviation from the autocollimator's beam. This kit allows the user calib..
$2,506.00
Ex Tax:$2,506.00
The GuideStar™ II Laser Beam Steering Correction System uses two Model 8784 GuideStar II Camera Sensors to provide continuous tracking of both laser beam positions and laser beam profiles. Designed for accuracy, reliability, and ease-of-use, the GuideStar II System is the answer to laser beam drift ..
$895.00
Ex Tax:$895.00