The 90019426 Male to Male BNC Cable has a 60 inch length...
$18.80
Ex Tax:$18.80
The TS-510 is a calibrated NTC 10 kΩ leaded thermistor with a baked on phenolic coating for durability and long-term stability. These have solid nickel 30 AWG wires with Teflon insulation to provide insulation when assembled in a heat sink or plate with a lead length of 3 inches (76 mm). They are id..
$74.00
Ex Tax:$74.00
The LPC-388 is a current/voltage monitor cable to be used with the LPB-380 Laser Pulse Board for the LDP-3840B Pulsed Laser Diode Driver and the LPB-386 Laser Pulse Board for the LDP-3830 Pulsed Laser Diode Driver. This is an SMB to BNC connector...
$75.00
Ex Tax:$75.00
The CLD-1 Cylindrical Diode Adaptor mounts cylindrical laser diode packages with an outside diameter up to 0.6 inch (15.2 mm). The mount adaptor has an outside diameter of 1 in. (25.4 mm) and can be mounted in PERFORMA™ and ULTIMA® optical mounts for tip-tilt...
$31.00
Ex Tax:$31.00
The CC-390 Interconnect cable is a flat copper cable for carrying high CW and QCW current to high power laser diodes. The flat cable is ideal for QCW applications with low inductance for clean pulses at the laser. It is terminated at one end and compatible with ILX’s LDX-36000 Series high curr..
$446.00
Ex Tax:$446.00
The CC-395 Interconnect cable is a flat copper cable for carrying high CW and QCW current to high power laser diodes. The flat cable is ideal for QCW applications with low inductance for clean pulses at the laser. It is terminated at one ends and compatible with ILX’s LDX-36000 Series high cur..
$524.00
Ex Tax:$524.00
The CC-340 Current Source Interconnect cable is designed to carry high current to high power laser diodes. The cable is ideal for QCW applications with low inductance for clean pulses at the laser. The CC-340 is terminated at one end for quick and easy connection to ILX Lightwave's LDX-36000 High Po..
$227.00
Ex Tax:$227.00
The CC-308H Current Source Interconnect Cable is designed to carry high current to high power laser diodes. The CC-308H cable uses 16 gauge wire for increased current capacity. The cable is terminated at one end for quick and easy connection to ILX Lightwave's LDX-36000 Series High Power Precision C..
$175.00
Ex Tax:$175.00
The CC-320 Current Source Interconnect Cable is designed to carry high current to high power laser diodes. The CC-320 cable uses 10 gauge wire for current capacities up to 40A and is terminated at one end for quick and easy connection to ILX Lightwave's LDX-36000 Series High Power Laser Diode Driver..
$175.00
Ex Tax:$175.00
The CC-305S Current Source Interconnect Cable is a twisted-pair cable with braided outer shield. This cable has been designed with superior rejection of most transient noise signals to provide the lowest noise current sourcing and measurement possible for laser diodes. The CC-305S cable is terminate..
$87.00
Ex Tax:$87.00
The CC-316M Laser Current Cable Bundle is a set of eight twisted-pair cables with braided outer shields. The cable composition is identical to ILX's standard CC-305S Current Source Interconnect Cable but has a shorter length to accommodate installation in the confined space of an equipment rack. Thi..
$431.00
Ex Tax:$431.00
The CC-355S Current Source Interconnect Cable is a twisted-pair cable with braided outer shield. This cable has been designed with superior rejection of most transient noise signals to provide the lowest noise current sourcing and measurement possible for laser diodes. The CC-355S cable is terminate..
$112.00
Ex Tax:$112.00