The XPS-RLM is a high-performance,very easy to use, one-axis integrated motion controller/driver for direct drive motors. Using the same robust QNX operating system as the XPS-Qx, it has a faster PCI bus enabling 10kHz servo control per axis. The web interface has been improved for easy login, confi..
$2,847.00
Ex Tax:$2,847.00
10 m long, DB25M to DB15F cable recommended for use with UTS, URS, UZS, RVS and BGS series ESP compatible stages...
$398.00
Ex Tax:$398.00
The ESP300-R Rack Mounting Brackets are used to mount a ESP301 motion controller and driver in a 19 inch rack...
$68.00
Ex Tax:$68.00
The AG-UC2-OEM Agilis™ Driver is designed to be integrated into OEM equipment by mounting directly onto your printed-circuit board. It can drive 2 axis at a time. If appropriately multiplexed it can be used switch between Agilis nanopositioners that have been embedded into your system. In a small co..
$381.00
Ex Tax:$381.00
The XPS-RL2 is a high-performance,very easy to use, 2-axis integrated motion controller/driver. Using the same robust QNX operating system as the XPS-Qx, it has a faster PCI bus enabling 10kHz servo control per axis. The web interface has been improved for easy login, configuration, programming, etc..
$4,334.00
Ex Tax:$4,334.00
The XPS-RL2X is a high-performance,very easy to use, 2-axis integrated motion controller/driver. Using the same robust QNX operating system as the XPS-Qx, it has a faster PCI bus enabling 10kHz servo control per axis. The web interface has been improved for easy login, configuration, programming, et..
$5,826.00
Ex Tax:$5,826.00
3 m long, DB25M to DB15F cable recommeded for use with UTS, URS, UZS, RVS and BGS series ESP compatible stages...
$207.00
Ex Tax:$207.00
The NPC3SG is a 3-channel piezo amplifier for precision control of all Newport Nanopositioning products and other low voltage PZTs. Optimized for usability and versatility, these low-noise piezo amplifiers can supply a permanent current of 40 mA per channel in a voltage range of -20 VDC to 130 VDC. ..
$3,906.00
Ex Tax:$3,906.00
The NPC3 is a 3-channel piezo amplifier for precision control of all Newport Nanopositioning products and other low voltage PZTs. Optimized for usability and versatility, these low-noise piezo amplifiers can supply a permanent current of 40 mA per channel in a voltage range of -20 VDC to 130 VDC. Th..
$2,976.00
Ex Tax:$2,976.00
The E4738A is a single axis driver card compatible with the ESP301 controller. It can drive 2 or 4-phase stepper and brush DC motors up to 3A, 48V per axis. For proper and safe installation, refer to the ESP301 Users Manual, Section E.1 Adding Axes...
$476.00
Ex Tax:$476.00
The XPS-RL4 is a high-performance,very easy to use, 4-axis integrated motion controller/driver. Using the same robust QNX operating system as the XPS-Qx, it has a faster PCI bus enabling 10kHz servo control per axis. The web interface has been improved for easy login, configuration, programming, etc..
$4,919.00
Ex Tax:$4,919.00
The XPS-RL4X is a high-performance,very easy to use, 4-axis integrated motion controller/driver. Using the same robust QNX operating system as the XPS-Qx, it has a faster PCI bus enabling 10kHz servo control per axis. The web interface has been improved for easy login, configuration, programming, et..
$6,416.00
Ex Tax:$6,416.00