The LBP-UVBS is the beam splitter which can be mounted on the LBP2-UVIMG UV Image Converter at 45 degree angle. It reduces the intensity of the beam on the image converter by approximately 20 times (~6% reflected, 94% transmitted). Used for beam intensities up to 300 mJ/cm2 at 193 nm. Comes with a..
$607.00
Ex Tax:$607.00
The LBP-UVIMG Image Converter is a fluorescent plate with a 1:1 imaging optics combined in a single barrel design. The fluorescent plate converts UV radiation, poorly imaged by silicon cameras due to low responsivity, into visible light. The 1:1 imaging optics then image the laser spot onto the CC..
$2,958.00
Ex Tax:$2,958.00
The LBP2-HR-IR2 Laser Beam Profiler, replacing the obsoleting camera of LBP2-HR-IR, is a powerful software driven camera with comprehensive beam diagnostic measurement features. It features the new Model SP928-1550, a 1/1.8 inch format 1924 x 1448 pixel CCD camera with phosphor coating for near IR s..
$7,951.00
Ex Tax:$7,951.00
The LBP2-IR2 Laser Beam Profiler, replacing the obsoleting camera of LBP2-IR, is a powerful software driven camera with comprehensive beam diagnostic measurement features. It features the new Model SP907-1550, a 1/1.8 inch format 964 x 724 pixel CCD camera with phosphor coating for near IR sensitivi..
$478.00
Ex Tax:$478.00
The LBP2-HR-VIS2 Laser Beam Profiler, replacing the obsoleting camera of LBP2-HR-VIS, is a powerful software driven camera with comprehensive beam diagnostic measurement features. It features the new Model SP928, a 1/1.8 inch format 1924 x 1448 pixel CCD camera for the wavelength range between 190 a..
$3,267.00
Ex Tax:$3,267.00
The LBP2-VIS2 Laser Beam Profiler, replacing the obsoleting camera of LBP2-VIS, is a powerful software driven camera with comprehensive beam diagnostic measurement features. It features the new Model SP907, a 1/1.8 inch format 964 x 724 pixel CCD camera for the wavelength range between 190 and 1100 ..
$2,829.00
Ex Tax:$2,829.00
The PEPS-3P-12 Laser Power and Position Sensor measures laser beam position as well as power and single shot energy. It is a quad cell thermopile detector. It has a 12 mm active diameter and can measure beam position to 0.15 mm accuracy. It measures power from 160 µW to 3 W and energy from 30..
$1,585.00
Ex Tax:$1,585.00
The PEPS-3-9.5 Laser Power and Position Sensor measures laser beam position as well as power and single shot energy. It is a quad cell thermopile detector. It has a 12 mm active diameter and can measure beam position to 0.15 mm accuracy. It measures power from 160 µW to 3 W and energy from 30..
$1,594.00
Ex Tax:$1,594.00
The LBP2-SAM-NIR2 beam sampler is designed so that the preferential polarization selection effect of a single wedge is cancelled out and the resulting beam image is polarization corrected to restore the polarization components of the original beam. The beam sampler operates by reflecting the incomin..
$2,153.00
Ex Tax:$2,153.00
The LBS2-SAM-BB2 beam sampler is designed so that the preferential polarization selection effect of a single wedge is cancelled out and the resulting beam image is polarization corrected to restore the polarization components of the original beam. The beam sampler operates by reflecting the incoming..
$4,553.00
Ex Tax:$4,553.00
The LBP2-SAM-UV2 beam sampler is designed so that the preferential polarization selection effect of a single wedge is cancelled out and the resulting beam image is polarization corrected to restore the polarization components of the original beam. The beam sampler operates by reflecting the incoming..
$2,665.00
Ex Tax:$2,665.00
The LBP2-SAM-VIS2 beam sampler is designed so that the preferential polarization selection effect of a single wedge is cancelled out and the resulting beam image is polarization corrected to restore the polarization components of the original beam. The beam sampler operates by reflecting the incomin..
$2,111.00
Ex Tax:$2,111.00