The 883-OH is a general purpose 1 inch optic holder for the Newport photodiode detectors. Any 1inch diameter filter or lens with up to 0.35 inch thickness can be accommodated. Newport's A-1.25-1RR retaining ring is included and a spare can be separately ordered. The lens side has 1.063-20 thread, an..
$74.00
Ex Tax:$74.00
The 818-FA2 is a bare fiber holder mount for Newport's photodiode detectors. An optical fiber can be loaded on Model FP3-FH1 Bare Fiber Holder, available separately for purchase, which is inserted into 818-FA2. Please note that Newport does not calibrate the detectors with any of these adapters im..
$86.00
Ex Tax:$86.00
The FP3-FH1 Bare Fiber Holder is a cleverly designed fiber clamp that is used to hold 250 μm bare fibers without damaging the fiber. It in turn plugs into the 818-FA2 Bare Fiber Holder Mount which allows one to attach the assembly to the front end of the detector housing.The FP3-FH1 combined with..
$302.00
Ex Tax:$302.00
The 918D-BASE-KITR Base Mounting Kit is for 918D Series Photodetectors It is made of Anodized Aluminum with mounting flanges and is RoHS compliant...
$53.00
Ex Tax:$53.00
The 818-FA Connectorized Fiber Adapter Mount allows FP3/FP4 fiber connector adapters to be connected to 818/918/918D series detectors. Adapters are attached to the 818-FA Fiber Adapter Mount with two screws, allowing for easier insertion and unplugging of fiber optic connectors.Please note that New..
$81.00
Ex Tax:$81.00
The 884-E2000FC Fiber Adapter accommodates optical fibers terminated with the Diamond’s E-2000TM PC fiber connectors. The adapter is directly screwed on the detector head or on the 884 Series attenuator. It is compatible with the Newport 818-xx-L, 818, 918D Series Low-Power Photodetectors, and..
$240.00
Ex Tax:$240.00
The FP4-FC Fiber Connector Adapter accommodates optical fibers terminated with FC connectors. The adapters are attached to the 818-FA Fiber Adapter Mount with two screws, allowing for easier insertion and unplugging of fiber optic connectors. Please note that Newport does not calibrate the detector..
$76.00
Ex Tax:$76.00
The 884-FCA Fiber Adapter accommodates optical fibers terminated with FC/APC connectors. The adapter is directly screwed on the detector head or on the 884 Series attenuator. The fiber connector is machined at an angle so that the light coming out from the fiber tip is perpendicular to the detecto..
$56.00
Ex Tax:$56.00
The 884-FC Fiber Adapter accommodates optical fibers terminated with FC/PC connectors. The adapter is directly screwed on the detector head or on the 884 Series attenuator. The typical distance from the fiber ferrule tip to the detector surface is approximately 4.57 mm (0.18 in.) for -SL and -UV d..
$49.00
Ex Tax:$49.00
The FP4-LC Fiber Connector Adapter accommodates optical fibers terminated with LC connectors. The adapters are attached to the 818-FA Fiber Adapter Mount with two screws, allowing for easier insertion and unplugging of fiber optic connectors. Please note that Newport does not calibrate the detectors..
$151.00
Ex Tax:$151.00
The all new FP4-COL-1550 Fiber Adapter Core collimates the laser beam from a fiber tip so that the beam does not overfill the active area of the 818 and 918D series IR and IG detectors. It employs a 1.8 mm diameter graded index lens with an AR coating between 1250 to 1650 nm. This part is inserted..
$247.00
Ex Tax:$247.00
The 884-IGR OD3 Attenuator is a stackable OD3 attenuator that can be mounted to an 818-IG series detector to attenuate the input beam. It is the RoHS compliant version of legacy 883-IG and 884-IG. The clear aperture is 10.3 mm. Note that one attenuator is already included and calibrated in the 818-I..
$129.00
Ex Tax:$129.00