description: 2.5 m cable (15-pin to 26-pin D-Sub and leads) to connect the NI 9512 to the P7000 stepper drive. 1 m cable (MDR to 37-pin D-Sub) to connect the NI 9512 to a 37-pin connector block. 37-pin connector block for spring-type connectivity to motion I/O and encoder feedback....
$0.00
Ex Tax:$0.00
description: 1 m Y-cable (15-pin D-SUB and MDR to 37-pin D-SUB) to connect the NI 9512 to 37-pin connector blocks. 37-pin connector blocks for spring-type connectivity to third-party drives and motion I/O....
$0.00
Ex Tax:$0.00
description: 2.5 m cable to directly connect NI 951x C Series drive interface modules to AKD servo motor drive. Cable and all connector blocks included. 15-pin D-Sub and MDR to AKD drive connectors....
$0.00
Ex Tax:$0.00
description: Higher-Power Motor Screw-Terminal Accessory for NI 9505 Increased output power for the NI 9505 module. Integrated strain relief for accessory. Additional strain relief for external cabling. With the NI 9931 attached, the NI 9505 can deliver a maximum current of 7.3 A at 40 ºC, 1 A at 70..
$0.00
Ex Tax:$0.00
description: NI SMD-7620 (120VAC) & NI SMD-7621 (220VAC) Anti-resonance. Torque ripple smoothing. Microstepping. Microstep emulation. Idle current reduction. Configure Complete CompactRIO System....
$0.00
Ex Tax:$0.00
description: SMD-7610, SMD-7611, & SMD-7612 Switch-selectable parameters. Anti-resonance. Microstepping. Microstep emulation. Configure Complete CompactRIO System....
$0.00
Ex Tax:$0.00
description: Stepper Motor and Drive Integrated Into a Single Device NEMA 17 and 23 frame sizes. Anti-resonance. Torque ripple smoothing. Microstep emulation. Dip switch setup. Optional dual shaft or integrated incremental encoder. Configure Complete CompactRIO System....
$0.00
Ex Tax:$0.00
description: Adapters for Yaskawa, Panasonic, Mitsubishi Drives NI MCA-7790 adapters connect the NI PCI-7390 to popular drives in position (pulse) command mode. Specific versions for Yaskawa Sigma II, Mitsubishi MR-J2S, and Panasonic Minas A drives. Included status LEDs and screw terminals for addit..
$0.00
Ex Tax:$0.00
description: 2-axis stepper power drive, 1.4 A per axis. CE certified. Front panel configuration. Host PC bus power monitoring/shutdown. Power supply, driver, heat sink and cooling. User-selectable microstepping....
$0.00
Ex Tax:$0.00
description: 4-axis stepper power drive, 1.4 A per axis. CE certified. Front panel configuration. Host PC bus power monitoring/shutdown. Power supply, driver, heat sink, and cooling. User-selectable microstepping....
$0.00
Ex Tax:$0.00
description: Rugged, reconfigurable motion control system. FPGA parallel processing capabilities to optimize your control algorithms. C Series drive interface modules to connect to stepper and servo drives. Stepper drives and motors for a wide range of applications. Connector block connectivity to t..
$0.00
Ex Tax:$0.00
description: 1-Axis, 525 W Stepper Drive 3.5 A peak, 2.5 A continuous current output, 320 V bus voltage. Selectable 200 to 50,000 steps/revolution microstepping. Precision motion with encoderless stall detection, antiresonance filtering and dynamic smoothing. 120 or 240 VAC powered. Easy connectivit..
$0.00
Ex Tax:$0.00