The SV-0.5 Compact Adjustable Width Slit provides precise micrometer-driven adjustment of two blades centered equally about a 1/2 inch (12.7 mm) through-hole. The slit width ranges from fully closed to 0.20 inch (5 mm) and is designed so that the micrometer reading corresponds to the actual slit wid..
$0.00
Ex Tax:$0.00
The M-SV-0.5 Compact Adjustable Width Slit provides precise micrometer-driven adjustment of two blades centered equally about a 12.7 mm through-hole. The slit width ranges from fully closed to 5 mm and is designed so that the micrometer reading corresponds to the actual slit width. The slim profile ..
$236.00
Ex Tax:$236.00
The 77873 Beam Probe Fixed Flange Mount lets you slide the probe axially and secure it in position with set screws. It dos not have adjustment capability, and has a 1.5 Inch Series female flange...
$0.00
Ex Tax:$0.00
The 77803 Beam Probe Fixed Flange Mount lets you slide the probe axially and secure it in position with set screws. It dos not have adjustment capability, and has a 1.5 Inch Series male flange...
$48.00
Ex Tax:$48.00
The 77612 Beam Probe Rod Mount is an easy to use rod-mounted holder. Simply slide the beam probe into the optimal position and secure it with the set screw. It includes an SP-3 post for convenient 3" height. A post holder for mounting to an optical breadboard is not included...
$71.00
Ex Tax:$71.00
The 78150 Beam Splitter Mount holds a 2 inch (51 mm) square beam splitter, up to 0.25 inch (6 mm) thick, at a 45° angle. Since it can be coupled directly to Oriel light sources, monochromators, and detectors via the 1.5 Inch Series flanges, it is a convenient device for splitting a beam in an enclos..
$478.00
Ex Tax:$478.00
The CBL-CSMS-FW is a ribbon cable used to connect a filter wheel to the Oriel CS130 and CS260 monochromators, as well as the MS260i imaging spectrograph. The instrument provides power as well as control to the filter wheel. This ribbon cable is compatible with filter wheel models 74010, 74041, and U..
$66.00
Ex Tax:$66.00
The 77644 Collimating Beam Probe is made from fused silica and has a 19 mm effective focal length lens. It captures and collimates the output cone from fused silica fiber bundles...
$185.00
Ex Tax:$185.00
The 77645 Collimating Beam Probe has a low F/# compound glass lens with an 11 mm effective focal length. It collimates the highly divergent output from glass bundles, and transmits over their useful spectral range...
$162.00
Ex Tax:$162.00
The 76597 Fiber Bundle Collimating Probe collimates the highly divergent outputs of fiber bundles. This beam probe is used to collimate the output from our fiber bundles with NA between 0.2 and 0.27, a 180 to 2200 nm spectral range, and θ1/2 Divergence Range of 0.15° to 0.50°. The lens is mounted in..
$628.00
Ex Tax:$628.00
The 76595 Fiber Bundle Collimating Probe collimates the highly divergent outputs of fiber bundles. This beam probe is used to collimate the output from our fiber bundles with NA between 0.2 and 0.27, a 180 to 2200 nm spectral range, and θ1/2 Divergence Range of 0.15° to 0.50°. The lens is mounted in..
$814.00
Ex Tax:$814.00
The 76596 Fiber Bundle Collimating Probe collimates the highly divergent outputs of fiber bundles. This beam probe is used to collimate the output from our fiber bundles with NA between 0.2 and 0.27, a 180 to 2200 nm spectral range, and θ1/2 Divergence Range of 0.15° to 0.50°. The lens is mounted in..
$504.00
Ex Tax:$504.00