Available Options
The M-SST-58-12 SmartTable HD Series uniquely combines the powerful IQ® active damping technology with passive precision tuned damping technology used in RS series tables. The two technologies compliment each other, creating the highest performance table in the industry. The included ST-300 SmartTable Controller can be used in a stand-alone (no computer required) mode and is also USB2 compatible. When operating in the stand-alone mode SmartTable HD automatically tunes the table to maximize table damping independent of load. When connected to a computer via the USB2 port, the included software allows users to further fine tune and calibrate the table to the experiment at hand and gather vibration data in both the frequency and time domains. Isolators are sold separately.
feature | |
Bandwidth | monitoring vibration: 10-820 Hz and structural damping: 80-550 Hz |
Broadband Damping | Constrained layer core, damped working surface and composite edge finish |
Computer Interface | USB |
Core Design | Trussed Honeycomb, Vertically Bonded Closed Cell Construction, 0.010 in. Steel sheet materials, 0.030 in. triple core interface |
Hole Sealing Type | Easy clean conical cup, 19 mm deep, non-corrosive high impact reinforced composite material |
Length | 2400 mm |
Mounting Hole Borders | 12.5 mm |
Mounting Hole Pattern | 25 mm grid |
Mounting Holes | M6 |
Power Requirements | 100-240 VAC; 1.5A, 50/60Hz |
Surface Flatness | ± 0.1 mm over 600 mm square |
Thickness | 305 mm |
Top and Bottom Skins | 3/16 in. thick with integrated damping layer |
Tuned Damping | IQ active and 2 precision tuned dampers |
Width | 1500 mm |
Working Surface | 400 series ferromagnetic stainless steel |