The 70 Standard Rod has the sturdiness suitable for the majority of general laboratory applications. Made of steel, it has a 1.5 inch (38.1 mm) diameter and is 14 inch (356 mm) tall with a nylon gear rack set into the rod for rack-and-pinion control over component elevation. Steel provides much gre..
$167.00
Ex Tax:$167.00
The 71 Short Rod has the sturdiness suitable for the majority of general laboratory applications. Made of steel, it has a 1.5 inch (38.1 mm) diameter and is 7 inch (178 mm) tall with a nylon gear rack set into the rod for rack-and-pinion control over component elevation. Steel provides much greater..
$162.00
Ex Tax:$162.00
The 45 Damped Rod is the most sophisticated rod available for critical applications where acoustical and vibrational forces are a concern. These rods incorporate cylindrical masses constrained by damping layers, concentrated in the upper portion of the rod where they are most effective in dissipatin..
$191.00
Ex Tax:$191.00
The 75 Damped Rod is the most sophisticated rod available for critical applications where acoustical and vibrational forces are a concern. These rods incorporate cylindrical masses constrained by damping layers, concentrated in the upper portion of the rod where they are most effective in dissipatin..
$300.00
Ex Tax:$300.00
The 410-RC Adjustable Height Dual Rod Mounting Assembly positions heavy optical components and assemblies at various elevations with excellent stability. The assembly consists of two 1.5 in. (38.1 mm) diameter, 14 in. high solid steel rods attached to a heavy-duty base and connected together at the ..
$540.00
Ex Tax:$540.00
The 32A Optical Support Rod Fine Positioner provides fine height adjustment via a cap screw that engages a 1/4-20 tapped hole in either end of an optical support rod mounting platform. The cap screw runs in ball bearings and provides a height adjustment range of 0.7 inch (18 mm)...
$115.00
Ex Tax:$115.00
The M-32A Optical Support Rod Fine Positioner provides fine height adjustment via a cap screw that engages a M6 tapped hole in either end of an optical support rod mounting platform. The cap screw runs in ball bearings and provides a height adjustment range of 18 mm...
$115.00
Ex Tax:$115.00
The 20050-01 Heavy Duty Base Plate is part of the 410-RC Mounting Assembly. It is used as the base for (2) 14 inch solid steel rods in the assembly...
$111.00
Ex Tax:$111.00
The SR-1Z 1.5 inch Optical Pedestal Pillar has a 1.0 in. height and is constructed from solid stainless steel. SR Series optical pedestal pillars are designed for maximum stability by integrating multiple features into a single part. Rather than having several separate adaptors, these support pilla..
$0.00
Ex Tax:$0.00
The SR-1.5Z 1.5 inch Optical Pedestal Pillar has a 1.5 in. height and is constructed from solid stainless steel. SR Series optical pedestal pillars are designed for maximum stability by integrating multiple features into a single part. Rather than having several separate adaptors, these support pil..
$0.00
Ex Tax:$0.00
The M-SR-4Z Optical Pedestal Pillar is 38.1 mm diameter with a height of 101.6 mm and constructed from solid stainless steel. SR Series optical pedestal pillars are designed for maximum stability by integrating multiple features into a single part. Rather than having several separate adaptors, thes..
$40.00
Ex Tax:$40.00
The SR-2Z 1.5 inch Optical Pedestal Pillar has a 2.0 in. height and is constructed from solid stainless steel. SR Series optical pedestal pillars are designed for maximum stability by integrating multiple features into a single part. Rather than having several separate adaptors, these support pilla..
$0.00
Ex Tax:$0.00