The PL15 Laser Beam Dumps is usec to absorb incident light and capture unwanted laser beams. In the optics laboratory, they are used to stop stray laser beams to protect personel and equipment. In instrumentation, laser beam dumps and traps are used to contain a beam within a portion of the instrume..
$138.00
Ex Tax:$138.00
The ELM-P12 Light Shield is used to build a light-blocking enclosure. This item is 12 inches (304.8 mm) long and can be used with the entire12-inch-tall ELM Light Shield family of products. Create what you need for your setup assured the pieces are made to work together...
$47.00
Ex Tax:$47.00
The ELM-P24 Light Shield is used to build a light-blocking enclosure. This item is 24 inches (609.6 mm) long and can be used with the entire12-inch-tall ELM Light Shield family of products. Create what you need for your setup assured the pieces are made to work together...
$69.00
Ex Tax:$69.00
The ELM-P6 Light Shield is used to build a light-blocking enclosure. It helps keep unintentional light reflections where they should be, and keep stray light from affecting your measurements. Additionally, the Light Shield also shields from clumsy colleagues who might inadvertently bump your perfect..
$35.00
Ex Tax:$35.00
The ELM-CL corner connector is used to build a light-blocking enclosure. This item is used to connect two 12-inch-tall ELM Light Shield Plates in a right-angle corner. The mounting slots are located on the interior of the corner. Create what you need for your setup assured the pieces are made to wor..
$31.00
Ex Tax:$31.00
The ELM-CLX corner connector is used to build a light-blocking enclosure. This item is used to connect two 12-inch-tall ELM Light Shield Plates in a right-angle corner. The mounting slots are located on the exterior of the corner. Create what you need for your setup assured the pieces are made to wo..
$33.00
Ex Tax:$33.00
The ELS-P12 Light Shield is used to build a light-blocking enclosure. It helps keep unintentional light reflections where they should be, and keep stray light from affecting your measurements. Additionally, the Light Shield also shields from clumsy colleagues who might inadvertently bump your perfec..
$36.00
Ex Tax:$36.00
The ELS-P24 Light Shield is used to build a light-blocking enclosure. It helps keep unintentional light reflections where they should be, and keep stray light from affecting your measurements. Additionally, the Light Shield also shields from clumsy colleagues who might inadvertently bump your perfec..
$55.00
Ex Tax:$55.00
The ELS-P6 Light Shield is used to build a light-blocking enclosure. It helps keep unintentional light reflections where they should be, and keep stray light from affecting your measurements. Additionally, the Light Shield also shields from clumsy colleagues who might inadvertently bump your perfect..
$28.00
Ex Tax:$28.00
The ELM-LP Adjustable Light Port is used to allow the passing of optical beams into and out of the 12-inch-tall ELM perimeter enclosure. The port diameter is 0.5 in. (12.7 mm) and can be manually adjusted approximately 3 in. (72 mm) vertically and 2 in. (51 mm) laterally for alignment. The height ra..
$101.00
Ex Tax:$101.00
The ELS-LP Adjustable Light Port is used to allow the passing of optical beams into and out of the ELS perimeter enclosure. The port diameter is 0.5 in. (12.7 mm) and can be manually adjusted approximately 2 in. (50 mm) both vertically and laterally for alignment. The height range of the port is 3.8..
$86.00
Ex Tax:$86.00
The ELM-CP Cable Port is used to allow the passing of cords and cables into and out of the 12-inch-tall ELM perimeter enclosure. The port is 2.5 x 2.5 in. (63.5 x 63.5 mm) and has a sliding hatch to allow it to be completely closed when no cables are in use. Mounting slots are provided for mounting ..
$80.00
Ex Tax:$80.00