The Q-XE-LT10-A Lens Tube adaptor plate, which can attach to any of the 5 open faces of the cube, allows any of the LT10 series beam tubes to be interfaced to the cube...
$17.20
Ex Tax:$17.20
TheQ-XE-RA-1 Aegis Qube™ Adaptor allows SR series optical support rods to be used with the Aegis Qube™ System. This rod adaptor is made to attach to the top of the Q-OC-1 cubic enclosure and will provide super stable direct mounting of a compatible mirror mount to the rod within the cube. The Q-XE..
$31.00
Ex Tax:$31.00
The Q-XE-TA-1 beam tube adaptor plate, which can attach to any of the 5 open faces of the cube, allows any of the Q-BT series beam tubes to be interfaced to the cube. The fit between the Q-XE-TA-1 beam tube adaptor and the Q-BT beam tubes are designed to be loose to allow additional positioning flex..
$31.00
Ex Tax:$31.00
The Q-XE-TA-R light tight beam tube adaptor plate, which can attach to any of the 5 open faces of the cube, allows any of the Q-BT series beam tubes to be interfaced to the cube. The fit between the Q-XE-TA-R beam tube adaptor and the Q-BT beam tubes are designed to be light tight...
$31.00
Ex Tax:$31.00
The Q-CC-1 Cube Connector Pegs are used to mount two cubes together, face-to-face...
$10.80
Ex Tax:$10.80
The Q-XE-CP-B Cover Plate can be used to cover any open face of the Q-OC-1 cube. Unlike the Q-XE-CP-W and Q-XE-CP-1 cover plates, this cover plate has no access holes and is used when access to the inside of the cube is not reqired...
$16.20
Ex Tax:$16.20
the Q-XE-CP-1 Cover Plate can be used to cover any open face of the Q-OC-1 cube. Two access holes are provided in each cover plate to allow adjustment of an optical mount within the cube. Caps are included to cover the access holes...
$21.00
Ex Tax:$21.00
The Q-XE-CP-W Cover Plate can be used to cover any open face of the Q-OC-1 cube. A special sliding window is provided on this cover plate to allow access to optical mounts within the cube. The window can be closed and locked in place to prevent unwanted access to the inside of the cube...
$23.00
Ex Tax:$23.00
The Q-CP-1 allows optional post mounting of the cube to any one of its 5 open faces. This adaptor can be used to reorient the cube for vertical beam routing or as needed for other types of mounting configurations...
$31.00
Ex Tax:$31.00
The Q-XE-DI-1 provides access to the interior of the cube for fiber bundles with 0.25 diameter interfaces...
$66.00
Ex Tax:$66.00
The Q-XE-MA-1 can be used to allow a cube to be mounted directly to an optical table via base clamps such as the BC-5 and BC-6..
$31.00
Ex Tax:$31.00
The Q-XE-DI-2 provides access for connectorized optical fibers with SMA termination. The SMA termination is removable from the Q-XE-DI-2 interface plate and can be replaced with model 77675 which provides ST termination...
$66.00
Ex Tax:$66.00
Showing 1 to 12 of 12 (1 Pages)