Menu
Menu
Your Cart

Isolated Vibration Control System, Integrity 1, 3x8 ft. x 8 in., 1/4-20

Isolated Vibration Control System, Integrity 1, 3x8 ft. x 8 in., 1/4-20
Isolated Vibration Control System, Integrity 1, 3x8 ft. x 8 in., 1/4-20
  • Brand:
  • Product Code: INT1-38-8-A
$0.00
Ex Tax: $0.00

Available Options

Buy Now Request Quote
Add to Wish List Compare this Product

The Integrity 1 Series VCS is designed to provide a superior working surface for general purpose photonics applications that are not extremely sensitive to vibrations. Integrity 1 VCS systems are often used in spectroscopy, multimode fiber, micropositioning and non-interferometric applications. The INT1-38-8-A VCS™ Vibration Control System includes an active leveling isolated support frame and a 3 ft. wide x 8 ft. long x 8 in. thick optical platform with 1/4-20 threaded holes on a 1 in. grid. The isolated VCS™ platform also integrates Newport’s pneumatic isolation with a new rigid frame design to deliver an economical isolation platform with superior isolation performance.Integrity VCS systems' innovative isolation platform features an optional integrated shelf and mobility accessories to optimize laboratory space, organization and safety.

feature
Alphanumeric Grid Labels No
Broadband Damping Constrained layer core, damped working surface and composite edge finish
Core Design Trussed honeycomb, vertically bonded closed cell construction, 0.010 in. steel sheet materials, 0.030 in. triple core interface
Crated Weight - System 1027 lb
Crated Weight - Tabletop 710 lb
Deflection Under Load <9.0 x 10-5 in.
Frame Assembly Height 28.7 ±0.5 in.
Hole Sealing Type Easy clean non-corrosive high impact polymer conical cup, 0.75 in. deep
Horizontal Amplification at Resonance 6 dB
Horizontal Isolation, 10 Hz 98%
Horizontal Isolation, 5 Hz 88%
Horizontal Isolation, Res. 1 Hz
Length 8 ft.
Load Capacity per Isolator 800 lb
Maximum Air Pressure 85 psi
Maximum Dynamic Deflection Coefficient <2.8 x 10-3
Maximum Payload 2680 lb
Maximum Relative Motion Value <18.0 x 10-9 in.
Mounting Hole Borders 0.5 in.
Mounting Hole Pattern 1 in. grid
Mounting Hole Type 1/4-20
Non-Magnetic No
Surface Flatness ±0.006 in. over 2 ft. square
Thickness 8 in.
Top and Bottom Skins 0.134 in. thick with integrated damping layer
Vertical Amplification at Resonance 9 dB
Vertical Isolation, 10 Hz 98%
Vertical Isolation, 5 Hz 88%
Vertical Isolation, Res. 1.5 Hz
Weight - System 770 lb
Weight - Tabletop 520 lb
Width 3 ft.
Working Surface 400 Series ferromagnetic stainless steel
Working Surface Height 36.7 ±0.5 in.

Write a review

Tags: Isolated Vibration Control System , Integrity 1 , 3x8 ft. x 8 in. , 1/4-20 , INT1-38-8-A , Integrity 1 VCS 3.4 mm Skin Table Systems