LTA-HL Actuator, Integrated with CONEX-CC Controller
$2,024.00
Ex Tax: $2,024.00
Available Options
The CONEX- LTA-HL actuator with 25 mm travel is recommended for heavy load applications. LTA actuators are designed to fit into existing manual stages and other opto-mechanical components as direct replacement for manual micrometers. Features include a non-rotating tip to eliminate wear and folded motors to minimize the footprint and unwanted cantilevered loads.
The CONEX controller comes with a USB cable and a CONEX-PS-CB for daisy-chaining modules. Power supply to be ordered separately. For OEM applications, an optional retainer to secure the USB and power cables is available.
feature | |
Absolute Accuracy (Typical) | ±1.2 µm |
Absolute Accuracy, Guaranteed | ±3.0 µm |
Axial Load Capacity | 100 N |
Axial Load Capacity, Inverse | -120 N |
Bi-directional Repeatability, Guaranteed | ±1.0 µm |
Bi-directional Repeatability, Typical | ±0.30 µm |
Cable Length | 3 m |
Computer Interfaces | USB |
Control Loop | Floating point digital PID loop with velocity and friction feedforward, 2 kHz servo rate |
Controller Dimensions | 93.2 x 53 x 23 mm |
Display | Two-color LED |
Drive Type | DC servo |
Encoder Resolution | 0.00737358 µm |
Maximum Speed | 1 mm/s |
Minimum Incremental Motion | 0.05 µm |
MTBF | 10,000 h (25% load, 30% Duty cycle) |
Origin Repeatability | ±2 µm |
Power Requirements | 24 VDC, 8 W |
Programming | 40+ intuitive, 2 letter ASCII commands. |
RoHS | Compliant |
Stage Type | LTA-HL Linear Actuator |
Travel Range | 25 mm |
Uni-directional Repeatability, Guaranteed | ±0.25 µm |
Uni-directional Repeatability, Typical | ±0.10 µm |