Vertical Stage, 4.5 mm Travel, Full Step Drive, 30 N Load, M4 Thread
$3,779.00
Ex Tax: $3,779.00
Available Options
The UZS80PP Vertical Stage offers 4.5 mm vertical adjustment of loads up to 30 N and mounts on top of our UTS series linear stages. The UZS80PP stepper motor version is a more economical version for less demanding applications. When used with motion controllers with high micro-step capability, like the XPS, ESP301 or SMC100PP, low noise operation and very small incremental motions are guaranteed. The UZS80PP does not use encoder feedback, but reaches a position by the number of commanded steps and micro-steps. For this purpose, the stepper motor is directly attached to the worm screw.
feature | |
Accuracy, Guaranteed | ±2.0 µm |
Accuracy, Typical | ±0.35 µm |
Bi-directional Repeatability, Guaranteed | ±2.2 µm |
Bi-directional Repeatability, Typical | ±0.5 µm |
Cable Length | 3 m |
Centered Load Capacity | 30 N |
Compliance in Pitch | 100 µrad/Nm |
Compliance in Roll | 80 µrad/Nm |
Connectors | DB15 Male |
Drive Screw Pitch | 0.8 mm |
Limit Switches | Optical |
Maximum Speed | 2 mm/s |
Minimum Incremental Motion | 0.20 µm |
MTBF | 20,000 h (25% load, 10% duty cycle) |
Origin | Optical, centered |
Origin Repeatability | ±2 µm |
Pitch, Guaranteed | ±75 µrad |
Pitch, Typical | ±37 µrad |
RoHS | Compliant |
Roll, Guaranteed | ±100 µrad |
Roll, Typical | ±50 µrad |
Thread Type | M4 |
Travel Range | 4.5 mm |
Uni-directional Repeatability, Guaranteed | ±0.7 µm |
Uni-directional Repeatability, Typical | ±0.25 µm |
Weight | 2.8 kg |