Available Options
The 9065-X-M Pint-Sized Triple Divide X Axis Translation Stage is ideal for applications where you are short on space but don't want to compromise on performance. Just 38.1 by 38.1 by 19.05 mm, this little ball-bearing stage packs the same performance as our full-sized Triple-Divide stage line. You get effortless modularity so you can configure and reconfigure from 1 to 2 to 3 axes coupled with stability that rivals integrated XYZ stages (which don't give you any flexibility). Fully compatible with our larger Triple-Divide stage line and accessories, you get 0.55 inch X travel with 0.5 μm resolution and better than <3 μm straight-line accuracy. M4 and M6 threaded mounting holes. NOTE: Actuators are not included with these stages. We recommend using our 9301 Adjustment Screws or our SM-13 micrometers. For even more precise control, try our 8301NF Picomotor™ actuator.
feature | |
Axes of Travel | X |
Bearings | Ball Bearings |
Load Capacity | 53 N |
Material | Aluminum |
Maximum Stage Travel | 14 mm |
Recommended Actuators | SM-13 mic, 9301 screw, 8301 pico |
Recommended Adjustment Screw | 9301 |
Recommended Lockable Micrometer | DM-13L |
Recommended Picomotor Actuator | 8301NF |
Recommended Vernier Micrometer | SM-13 |
Resolution | <0.5 µm |
Straight Line Accuracy | <3 µm |
Thread Type | M4 and M6 |