The MS-ATK Assembly and Mounting Tool Kit is compatible with the MS Series miniature linear stages...
$49.00
Ex Tax:$49.00
The M-RN-86 Ball and Socket Stage provides up to ±25° of tilt in any direction and a full 360° of rotation of a 56 x 56 mm platform. It is practical for rapid coarse alignment with full freedom of angular rotation. A simple clutch lever locks and unlocks the rotation of the platform in any position...
$492.00
Ex Tax:$492.00
The M-RN-50 Ball and Socket Stage provides up to ±25° of tilt in any direction and a full 360° of rotation of a 50 x 50 mm platform. It is practical for rapid coarse alignment with full freedom of angular rotation. A simple clutch lever locks and unlocks the rotation of the platform in any position...
$387.00
Ex Tax:$387.00
The 561-BL1 Ball Lens Module attaches 1 mm diameter ball lenses to a 561 Series stage. The ball lens module is gently held in a 561-MM Module Mount...
$60.00
Ex Tax:$60.00
The 561-BL2 Ball Lens Module attaches 2 mm diameter ball lenses to a 561 Series stage. The ball lens module is gently held in a 561-MM Module Mount...
$60.00
Ex Tax:$60.00
The 561-BL3 Ball Lens Module attaches 3 mm diameter ball lenses to a 561 Series stage. The ball lens module is gently held in a 561-MM Module Mount...
$60.00
Ex Tax:$60.00
The 9315 Ball Tipped Nudger is used to finely position your setup, or for precise relocation of your components. It offers 1/4-80 precision over a 0.5 inch travel range. Three nudgers and a flat surface can be used to relocate a mount precisely. The 0.75 inch slot is compatible with 1/4-20 or M6 cap..
$47.00
Ex Tax:$47.00
The 561-FH Bare Fiber Holder is designed to attach 125 μm fibers to 561 Series stages for alignment. The fiber gently held in precision V-groove...
$256.00
Ex Tax:$256.00
The 466A-711 Single Arm Bare Fiber Holder has a magnetic clamp arm for fast component changes. Compatible with the 466A Series Flexure Stages...
$205.00
Ex Tax:$205.00
The 466A-710 Double Arm Bare Fiber Holder has double V-grooves for repeatable fiber placing. Two clamp arms with 25 to 125 g adjustable clamping force swing clear of V-groove for easy loading and unloading of the fiber. Compatible with the 466A Series Flexure Stages...
$306.00
Ex Tax:$306.00
The 466A-709 Single Arm Bare Fiber Holder has double V-grooves for repeatable fiber placing. A single clamp arm with 25 to 125 g adjustable clamping force swings clear of V-groove for easy loading and unloading of the fiber. Compatible with the 466A Series Flexure Stages...
$219.00
Ex Tax:$219.00
The VP-BC is a set of four base clamps for a VP Series stage...
$129.00
Ex Tax:$129.00