The Model 37 Three-axis Tilt Platform provides tip, tilt, and rotation adjustments for aligning optical components. It is kinematic, with hardened and polished steel ball pivots and spring-preloaded spherical-tipped adjustments acting on hardened steel seats. It provides full, three-axis angular ori..
$667.00
Ex Tax:$667.00
The NPC3SG is a 3-channel piezo amplifier for precision control of all Newport Nanopositioning products and other low voltage PZTs. Optimized for usability and versatility, these low-noise piezo amplifiers can supply a permanent current of 40 mA per channel in a voltage range of -20 VDC to 130 VDC. ..
$3,906.00
Ex Tax:$3,906.00
The NPC3 is a 3-channel piezo amplifier for precision control of all Newport Nanopositioning products and other low voltage PZTs. Optimized for usability and versatility, these low-noise piezo amplifiers can supply a permanent current of 40 mA per channel in a voltage range of -20 VDC to 130 VDC. Th..
$2,976.00
Ex Tax:$2,976.00
The RSP-1T Rotation Stage features full ball bearing races, provides exceptionally smooth and continuous angular positioning for 1 inch (25.4 mm) diameter optics or components. A delrin retaining ring is provided to secure the optic. The rotating platform has six 8-32 and six M4 threaded holes for a..
$194.00
Ex Tax:$194.00
The RSP-2T Rotation Stage features full ball bearing races, provides exceptionally smooth and continuous angular positioning for 2 inch (50.8 mm) diameter optics or components. A delrin retaining ring is provided to secure the optic. The rotating platform has six 8-32 and six M4 threaded holes for a..
$289.00
Ex Tax:$289.00
The E4738A is a single axis driver card compatible with the ESP301 controller. It can drive 2 or 4-phase stepper and brush DC motors up to 3A, 48V per axis. For proper and safe installation, refer to the ESP301 Users Manual, Section E.1 Adding Axes...
$476.00
Ex Tax:$476.00
The XPS-RL4 is a high-performance,very easy to use, 4-axis integrated motion controller/driver. Using the same robust QNX operating system as the XPS-Qx, it has a faster PCI bus enabling 10kHz servo control per axis. The web interface has been improved for easy login, configuration, programming, etc..
$4,919.00
Ex Tax:$4,919.00
The XPS-RL4X is a high-performance,very easy to use, 4-axis integrated motion controller/driver. Using the same robust QNX operating system as the XPS-Qx, it has a faster PCI bus enabling 10kHz servo control per axis. The web interface has been improved for easy login, configuration, programming, et..
$6,416.00
Ex Tax:$6,416.00
The 488 Height-Adjustable Rotary Stage provides a large mounting platform, lockable motion, and a novel mechanical design that virtually eliminates all backlash and provides a rock-solid, wobble-free mount at any height. A scalloped adjustment ring provides non-rotating vertical travel over 1 inch (..
$406.00
Ex Tax:$406.00
The M-488 Height-Adjustable Rotary Stage provides a large metric mounting platform, lockable motion, and a novel mechanical design that virtually eliminates all backlash and provides a rock-solid, wobble-free mount at any height. A scalloped adjustment ring provides non-rotating vertical travel over..
$406.00
Ex Tax:$406.00
The 561-TS Narrow Profile T-Stand is a fixed platform used to mount a component between two positioning stages...
$239.00
Ex Tax:$239.00
The 561-UST Universal Stand is a fixed platform used to mount a component next to a 561 Series positioning stage...
$245.00
Ex Tax:$245.00