Menu
Menu
Your Cart

Laser Diode Driver, High Power CW/QCW, 85A, 12V, GPIB

Laser Diode Driver, High Power CW/QCW, 85A, 12V, GPIB
Laser Diode Driver, High Power CW/QCW, 85A, 12V, GPIB
Laser Diode Driver, High Power CW/QCW, 85A, 12V, GPIB
Laser Diode Driver, High Power CW/QCW, 85A, 12V, GPIB
Laser Diode Driver, High Power CW/QCW, 85A, 12V, GPIB
Laser Diode Driver, High Power CW/QCW, 85A, 12V, GPIB
Laser Diode Driver, High Power CW/QCW, 85A, 12V, GPIB
  • Brand:
  • Product Code: LDX-36085-12
$7,014.00
Ex Tax: $7,014.00

Available Options

The LDX-36085-12 High Power Laser Diode Driver is an 85A and 12V current source that offers CW, QCW, and Hard Pulse Output with multiple levels of laser diode protection. In QCW mode the LDX36085-12 can output up to 170A at 12V. In addition the LDX3608512 features 4-wire voltage measurement, photodiode measurement, and a trigger in and out.

For automated testing applications in an R&D or production environment, remote operation is easily accomplished through the GPIB/IEEE-488 interface. For virtual instrument programming, LabVIEW® instrument drivers are available free of charge. LabVIEW® instrument drivers can be downloaded from the Literature and Downloads tab on this page.

How are you mounting your laser diode?

feature
Computer Interfaces GPIB
Current Output 1 h Stability <100 ppm FS
Display Type 5-digit Green LED
Duty Cycle 0.5 to 20 %
Forward Voltage Accuracy +0.05% of 20mV
Forward Voltage Resolution 10 mV
Laser Compliance Voltage 12 V
Laser Current 85 A
Laser Current Accuracy ±(0.1% of FS +80 mA)
Laser Current Resolution 10 mA
Monitor Current Accuracy +0.1% of FS
Monitor Current Range 3 to 10000 µA
Noise/Ripple (rms) <40 mA
Output Current CW 85 A
Output Current QCW 170 A
Photodiode Reverse Bias 0 to 15 V
Power Requirements 100-120 VAC, 200-240 VAC
Pulse Repetition Rate 0.1 to 1000 Hz
Pulse Width 40 μs to 1 ms
Rise/Fall Time <25 µs
Temperature Coefficient <50 ppm FS/°C
Weight 13.5 kg

Write a review