The LNF-320 is a common-mode filter designed to reduce noise on laser diodes driven by ILX Lightwave current sources using the standard 9-pin D-sub connector. The filter is designed to be used in series with the laser cable. A current source is a naturally high output impedance device, resulting in ..
$95.00
Ex Tax:$95.00
The MB-400 allows any LDM-4980 Series Laser Diode Mount to be bolted to an optical table. The MB-400 is included with all case temperature controlled mounts...
$0.00
Ex Tax:$0.00
The CC-380 is an interconnect cable between the LDP-3840B pulsed laser diode driver and the LPB-380 Laser Mounting Board. This cable was designed as a low characteristic impedance cable specifically for pulsed applications. The resistance of this cable is a 3Ω and is intended to be used with t..
$129.00
Ex Tax:$129.00
The CC385 interconnect cable is specifically designed to connect the LDP-3830 Pulsed Current Source to the LPB-386 pulse board. The impedance of the cable matches the LDP-3830 and the LPB-386 impedance. Together with the LPB-386, the CC385 offers the best possible pulsing performance for the LDP-383..
$301.00
Ex Tax:$301.00
The RTD Temperature Sensor Converter allows an RTD or resistance temperature device to be used as a temperature feedback sensor with ILX Laser Diode Controllers and Temperature Controllers such as the LDT-5525 temperature controller, LDC-3700C Series laser diode controllers, and LDC-3900 modular las..
$355.00
Ex Tax:$355.00
The RM-137 Rack Mount Kit contains all the components necessary to mount an LDC-3908, LDC-3916, or LDC-3926 in a 19-inch wide, 24-inch deep rack or enclosure with support columns 20.5 inches from the front mounting surface. Two rack mount brackets and all necessary mounting hardware are provided. No..
$89.00
Ex Tax:$89.00
The RM-138 Rack Mount Kit contains all the components necessary to mount an LDC-3908, LDC-3916, or LDC-3926 in a 19-inch wide, 24-inch deep rack or enclosure with support columns 25 inches from the front mounting surface. Two rack mount brackets and all necessary mounting hardware are provided. Note..
$92.00
Ex Tax:$92.00
The RM-143 Rack Mount Kit contains all the components necessary to mount one FPM-8220 Fiber Optic Power Meter and FMH-8700 Series Fiber Optic Measurement Head in a standard 19-inch wide rack or enclosure. Two rack mount flanges and all necessary mounting hardware are provided...
$156.00
Ex Tax:$156.00
The RM-146 Single Rack Mounting Kit contains a pair of brackets which, when attached to the sides of an LDC-3706 series instrument, allows it to be placed ina standard 19-inch wide rack or enclosure...
$134.00
Ex Tax:$134.00
The RM-136 Single Rack Mount Kit contains all the components necessary to mount a single instrument from the LDC-37X4C Series in a standard 19-inch wide rack or enclosure. Two rack mount brackets and all necessary mounting hardware are provided...
$78.00
Ex Tax:$78.00
The RM-103 Single Rack Mounting Kit contains a pair of brackets which, when attached to the sides of an LDC-3900 mainframe, allow the instrument to be placed in a standard 19-inch wide rack or enclosure...
$125.00
Ex Tax:$125.00
The RM-124 Single Rack Mounting Kit contains all the components necessary to mount a single 3.5-inch high, 8.5-inch wide (width) instrument with an aluminum bezel in a standard 19-ich wide rack or enclosure.The kit is designed for use with the LDP-3811 series of instruments. Rack mount flanges, blan..
$78.00
Ex Tax:$78.00