Available Options
The 94011A-ES solar simulator is intended for the researcher who needs to closely simulate the sun’s spectrum, but does not require a large field of illumination. The 94011A-ES uses a 100 W ozone free xenon lamp to produce a 1.5 inch x 1.5 inch (38 mm x 38 mm) collimated beam.
The 94011A-ES solar simulator includes an AM1.5G air mass filter which provides Class A spectral performance based on current applicable standards at 1 SUN irradiance output. Other air mass filters can be exchanged without breaking down and returning the system.
An electronic shutter has been integrated into the system, allowing the lamp to be left on without continual illumination of the sample. This protects the sample and user from irradiation as well as decreases the strain from re-igniting the lamp often. The shutter controller has an open/close switch and a TTL input for external trigger applications.
Designed to meet the current demands of PV Researchers, the LCS-100 series is the next generation of our 96000 low cost solar simulator. It offers better performance and a simpler design in a smaller footprint.
Extended Warranties are available for this product. Conact Newport Sales for further information.
feature | |
Beam Divergence, Half Angle | <6 ° |
Lamp Type | Xenon |
Lamp Wattage | 100 W |
Line Regulation | 3E-4 |
Output Beam Size | 38 x 38 mm |
Spectral Match Classification | A (IEC 60904-9 2007)A (ASTM E927 - 10) |
Temporal Instability Classification | B (IEC 60904-9 2007)B (ASTM E927 - 10) |
Typical Output Power | 1.2 suns |
Uniformity Classification | B (IEC 60904-9 2007)B (ASTM E927 - 10) |
Working Distance | 7.0 +/- 1.0 in. |