The 78855 Oriel LineSpec is a 2048 pixel CCD detector operating from 200 to 1100 nm. By using the 77439 mounting flange, it can be connected to Oriel's popular MS125 spectrograph. A mounting flange is included standard on the axial port of all MS260i spectrographs, easily converting into a UV spectr..
$3,522.00
Ex Tax:$3,522.00
The 74001 Micrometer Driven Slit Assembly allows continuously variable width from 4 μm to 3 mm, and continuously variable height from 3 mm to 12 mm with ±10 μm repeatability. ±10 μm accuracy from 4 to 250 μm, ±5% from 250 μm to 3 mm. This slit assembly uses a precision micrometer driv..
$646.00
Ex Tax:$646.00
The 74002 Micrometer Driven Variable Slit Assembly for the MS257 1/4 m Monochromator and Imaging Spectrograph uses a precision micrometer to continuously vary the slit width from 4 μm to 3.0 mm. Slit height is also variable from 2 mm to 15 mm. It has ± 10 μm repeatability and ± 10 μm accura..
$706.00
Ex Tax:$706.00
The 77860 Monochromator Fiber Adapter holds fiber bundles with an 11 mm standard ferrule termination. It holds the bundle against the slit of any Oriel Monochromator or Spectrograph (instrument must have a fixed slit assembly). We also use this coupler to hold single fibers at the entrance slit to a..
$129.00
Ex Tax:$129.00
The 77863 Monochromator Fiber Adapter is for Oriel Bundles with an 11 mm quick connect ferrule termination. The female flange on the 77863 couples to the male flange of a Fixed Slit Holder, and holds the fiber in the slit plane; the fiber replaces the slit. The 77863 works with most Oriel Monochroma..
$407.00
Ex Tax:$407.00
The 77855 Monochromator Fiber Adapter hold the rectangular end of the "Large Slit" Fiber Bundles at the input of Model 77250 Oriel Monochromators. The fiber replaces the slit. This fiber adapters does not require a fixed slit holder for mounting. It couples directly to the aperture of the monochroma..
$212.00
Ex Tax:$212.00
The 77854 Monochromator Fiber Adapter holds the rectangular end of the "Large Slit" Fiber Bundles at the input of Model MS257™ Oriel Monochromators. The fiber replaces the slit. This fiber adapter does not require a fixed slit holder for mounting. It couples directly to the aperture of the monochrom..
$320.00
Ex Tax:$320.00
The RF-ADAPT Rectangular Fiber Bundle Adapter provides a simple solution to optimally coupling Oriel’s circular to rectangular fiber bundles to the input flange of any Oriel monochromator. Effectively coupling a fiber into an instrument can be difficult, as light diverges upon leaving the fibe..
$356.00
Ex Tax:$356.00
The 77502 Monochromator Fiber Adapter holds 11 mm Quick Connect terminated fibers at the input of the MS257 Oriel Spectrograph and aligns them along the Z axis; 4 mm adjustment is possible. Mount the 77502 directly to the instrument's slit assembly; the fiber is held against the slit...
$1,009.00
Ex Tax:$1,009.00
The 77387 Monochromator Mounting Kit for the 77250 Monochromator allows the greatest flexibility. With two optical rods and rod holders (ordered separately, you can vary the optical axis height to match your source or detector...
$276.00
Ex Tax:$276.00
The 77738 Motor Driven Curved Slit Assembly is used with the MS257 and has 20 mm high slits which are slightly curved to compensate for the inherent bending of the entrance slit image. Slit widths range from 4 μm to 2.0 mm, as with the 77722 Assembly (repeatability and accuracy are also the same ..
$1,835.00
Ex Tax:$1,835.00
The 77722 Motor Driven Variable Slit Assembly is designed exclusively for the MS257 monochromator. It uses a micro stepping motor to control a slit width range of 4 μm to 2.0 mm. Slit height is 15 mm. The slit width can be set using the Hand Controller, by computer, or automatically by the MS257 ..
$1,388.00
Ex Tax:$1,388.00