High Peak Power Thermopile Sensor, 50 W, 17.5 mm, 0.24-2.2 μm
$1,513.00
Ex Tax: $1,513.00
Available Options
The 919P-050-18HP is a thermal sensor with a special coating for high energy density pulsed laser beams, measuring up to 50W continuously. Its spectrally covers the wavelength range 0.24 – 2.2 μm (PF type coating with a diffuser). It has an aperture of 17.5 mm and can measure power from 140 mW to 50 W and single shot energy from 60 mJ to 200 J. It has a 1/4-20 tapped hole for post or plate mounting and comes with a 1/2 inch diameter post.
feature | |
Beam Size Dependence | ±0.5 % |
Calibration Uncertainty | ±5 % |
CE | Compliant |
Connector Type | DB15 |
Cooling | Heat Sink |
Detector Active Area | 2.40 cm2 |
Detector Type | High Energy Pulse |
Dimensions | 64 x 64 x 75 mm |
Linearity | ±1.5 % |
Maximum Energy Density | <100 ns, 4 J/cm20.5 ms, 15 J/cm22 ms, 25 J/cm210 ms, 50 J/cm2 |
Maximum Measurable Power | 50 W |
Maximum Power Density | 0.5 kW/cm2 |
Noise Equivalent Energy | 20 mJ |
Noise Equivalent Power | 7 mW |
Operating Temperature Range | 15°C to 35°C, <70% RH, non-condensing |
Power Range | 140 mW - 50 W |
Repeatability | ±1 % |
Rise Time | 2 s |
RoHS | Compliant |
Sensor Size | Ø17.5 mm |
Spectral Range | 0.24 to 2.2 µm |
Storage Temperature Range | 0°C to 50°C, <90% RH |
Weight | 0.35 kg |