Thermopile Sensor, 35 W CW, 50 mm, 0.19-11 μm
$1,406.00
Ex Tax: $1,406.00
Available Options
The 919P-040-50 is a large aperture thermal sensor measuring up to 35W continuously and 150W with a 2 minute limit. Its spectrally flat coating covers the wavelength range 0.19 - 11 μm (BB type coating). It has an aperture of 50mm and can measure power from 100 mW to 150 W and single shot energy from 100 mJ to 200 J. It has a 1/4-20 tapped hole for post or plate mounting and comes with a 1/2 inch diameter post. Calibration of the thermopile detector is required annually to assure NIST traceability.
feature | |
Beam Size Dependence | ±0.5 % |
Calibration Uncertainty | ±3 % |
Connector Type | DB15 |
Cooling | Sensor Body |
Detector Active Area | 19.63 cm2 |
Detector Type | General Purpose |
Dimensions | 90 x 90 x 33 mm |
Linearity | ±1 % |
Maximum Energy Density | <100 ns, 0.3 J/cm20.5 ms, 5 J/cm22 ms, 10 J/cm210 ms, 30 J/cm2 |
Maximum Measurable Power | 35 W |
Maximum Power Density | 12 kW/cm2 |
Noise Equivalent Energy | 250 mJ |
Noise Equivalent Power | 5 mW |
Operating Temperature Range | 15°C to 35°C, <70% RH, non-condensing |
Power Range | 100 mW - 35 W, 150 W for 2 min |
Repeatability | ±0.5 % |
Rise Time | 2.5 s |
RoHS | Compliant |
Sensor Size | Ø50 mm |
Spectral Range | 0.19 to 11 µm |
Storage Temperature Range | 0°C to 50°C, <90% RH |
Weight | 0.6 kg |
Tags:
Thermopile Sensor
, 35 W CW
, 50 mm
, 0.19-11 μm
, 919P-040-50
, 919P Thermopile Power Sensors