Thermopile Sensor, 30 W, 18 mm, 0.19-11 μm
$1,002.00
Ex Tax: $1,002.00
Available Options
The new 919P-030-18 General Purpose Thermopile Sensor measures laser power up to 30 W. It's spectrally flat coating covers the wavelength range 0.19 - 11 μm (BB type coating). It has an active diameter of 17.5 mm and can measure power from 20 mW to 30 W and single shot energy from 6mJ to 30J. It has a 1/4-20 tapped hole for post or plate mounting and comes with a 1/2 inch diameter post.
Calibration of the thermopile detector is required annually to assure NIST traceability.
feature | |
Beam Size Dependence | ±0.5 % |
Calibration Uncertainty | ±3 % |
Connector Type | DB15 |
Cooling | Heat Sink |
Detector Active Area | 2.40 cm2 |
Detector Type | General Purpose |
Dimensions | 64 x 64 x 49 mm |
Linearity | ±1 % |
Maximum Energy Density | <100 ns, 0.3 J/cm20.5 ms, 2 J/cm22 ms, 2 J/cm210 ms, 2 J/cm2 |
Maximum Measurable Power | 30 W |
Maximum Power Density | 20 kW/cm2 |
Noise Equivalent Energy | 20 mJ |
Noise Equivalent Power | 1 mW |
Operating Temperature Range | 15°C to 35°C, <70% RH, non-condensing |
Power Range | 20 mW - 30 W |
Repeatability | ±0.5 % |
Rise Time | 0.8 s |
RoHS | Compliant |
Sensor Size | Ø17.5 mm |
Spectral Range | 0.19 to 11 µm |
Storage Temperature Range | 0°C to 50°C, <90% RH |
Weight | 0.3 kg |