Thermopile Sensor, 10 W, 16 mm, 0.19-11 μm
$811.00
Ex Tax: $811.00
Available Options
The 919P-010-16 The new 919P-010-16 Thermopile Sensor is a general purpose laser power sensor measuring laser power up to 10 W. It's spectrally flat coating covers the wavelength range 0.19 to 11 μm (BB type coating). It has an active diameter of 16 mm and can measure power from 20 mW to 10W and single shot energy from 6mJ to 2J. It has a 1/4-20 tapped hole for post or plate mounting and comes with a 1/2 inch diameter post. Calibration of the thermopile detector is required annually to assure NIST traceability.
feature | |
Beam Size Dependence | ±0.5 % |
Calibration Uncertainty | ±3 % |
Connector Type | DB15 |
Cooling | Heat Sink |
Detector Active Area | 2.01 cm2 |
Detector Type | General Purpose |
Dimensions | Ø65 x 33.5 mm |
Linearity | ±1 % |
Maximum Energy Density | <100 ns, 0.3 J/cm20.5 ms, 2 J/cm22 ms, 2 J/cm210 ms, 2 J/cm2 |
Maximum Measurable Power | 10 W |
Maximum Power Density | 28 kW/cm2 |
Noise Equivalent Energy | 20 mJ |
Noise Equivalent Power | 1 mW |
Operating Temperature Range | 15°C to 35°C, <70% RH, non-condensing |
Power Range | 20 mW - 10 W |
Repeatability | ±0.5 % |
Rise Time | 0.8 s |
RoHS | Compliant |
Sensor Size | Ø16 mm |
Spectral Range | 0.19 to 11 µm |
Storage Temperature Range | 0°C to 50°C, <90% RH |
Weight | 0.2 kg |