Available Options
The 919E-10-35-10K pyroelectric energy detector comes with a diffuser for concentrated beams. It has a 35 mm diameter aperture and can measure energies from 20 µJ up to 10 J. It can operate at repetition rates up to 10 kHz and covers the spectral range from 0.19 - 2.2 and 2.94µm. The sensor comes with a standard 1.5 meter cable for connecting to a power meter. Compatible power meter models include 1919-R, 843-R, 843-R-USB, and 841-PE-USB. Since certain specifications are interrelated with various settings, please refer to the complete specifications sheet under Resources below to determine if this product meets your requirement. Cable length is 1.5 meters. It has one 1/4-20 tapped hole on the side and one M6 hole on the back side of the head for mounting and comes with a 1/2 inch diameter post.
feature | |
Calibration Uncertainty | ±4% basic, add ±2% @ 0.2-3 µm, ±5% @ 10.6 µm |
Connector Type | DB15 |
Cooling | Sensor Body |
Damage Threshold | 1 J/cm2 (<100 ns pulse), 2 J/cm2 (1 µs), 20 J/cm2 (300 µs), 40 J/cm2 (2 ms) |
Detector Type | Pyroelectric |
Dimensions | Ø62 x 35 mm |
Maximum Average Power | 25 W |
Maximum Pulse Energy | 10 J |
Maximum Pulse Width | 20 ms |
Maximum Repetition Rate | 10 kHz |
Minimum Power Density | ±2% with energy for >7% of full scale |
Noise Equivalent Energy | 1 µJ in 2 µs, 40 µJ in 5 ms setting |
Operating Temperature | 15°C to 35°C, <70% RH, non-condensing |
Reflectance | 25% approx. |
RoHS | Compliant |
Sensor Size | Ø35 mm |
Spectral Range | 0.19 to 2.2, and 2.94 µm |
Storage Temperature | 0°C to 50°C, <90% RH |
Weight | 0.25 kg |