Pyroelectric Energy Sensor, 0.15 -12μm, 200 µJ, 25 kHz
$0.00
Ex Tax: $0.00
Available Options
The 919E-200U-8-25K pyroelectric energy detector is for very low energies and has an 8 mm diameter aperture. It can measure energies from <0.05 uJ to 200 uJ. It can operate at repetition rates up to 25 kHz and covers the spectral range from 0.15 - 12 µm. The sensor comes with a standard 1.5 meter cable for connecting to a power meter. Compatible with power meter models 1919-R, 843-R, 843-R-USB, and 841-PE-USB. Since certain specifications are interrelated with various settings, please refer to the complete specifications sheet under Resources below to determine if this product meets your requirement. Cable length is 1.5 meters. It has one 1/4-20 tapped hole for mounting and comes with a 1/2 inch diameter post.
feature | |
Calibration Uncertainty | ±3% basic, add ±4% @ 240-800 nm, ±8% @ 2-3 µm, ±15% @ 10.6 µm |
Connector Type | DB15 |
Cooling | Sensor Body |
Damage Threshold | 0.1 J/cm2 w/ < 100 ns, 0.2 J/cm2 w/ 1 µs, 3 J/cm2 w/ 300 µs pulses |
Detector Material | Metallic absorber |
Detector Type | Pyroelectric |
Dimensions | Ø62 x 21 mm |
Linearity | ±1.5% for >10 % of full scale |
Maximum Average Power | 2 W |
Maximum Pulse Energy | 200 uJ |
Maximum Pulse Width | 20 µs |
Maximum Repetition Rate | 25 KHz |
Noise Equivalent Energy | 0.01 µJ in 1 µs, 0.02 µJ in 20 µs setting |
Operating Temperature | 15°C to 35°C, <70% RH, non-condensing |
Reflectance | 50% approx. |
RoHS | Compliant |
Sensor Size | Ø8 mm |
Spectral Range | 0.15 to 12 µm |
Storage Temperature | 0°C to 50°C, <90% RH |
Weight | 0.25 kg |