Menu
Menu
Your Cart

Integrating sphere detector, collimated beam, 2 in., 200-1100 nm

Integrating sphere detector, collimated beam, 2 in., 200-1100 nm
Integrating sphere detector, collimated beam, 2 in., 200-1100 nm
Integrating sphere detector, collimated beam, 2 in., 200-1100 nm
Integrating sphere detector, collimated beam, 2 in., 200-1100 nm
Integrating sphere detector, collimated beam, 2 in., 200-1100 nm
  • Brand:
  • Product Code: 819C-UV-2-CAL
$3,058.00
Ex Tax: $3,058.00

Available Options

The 819C-UV-2-CAL is a NIST traceable calibrated integrating sphere detector using a 2 inch integrating sphere with a high performance silicon photodetector. The input port size is 0.5 in. diameter and the wavelength range is 200 – 1100 nm. It comes with an SMA fiber optic connector on the North pole as a standard feature allowing a small amount of light pickoff for wavelength measurement or any further analysis without affecting the overall system calibration. Note that the system calibration is no longer valid if any component is changed from the original calibrated configuration. For a very high power level, elevated temperature of the integrating sphere system can affect the measurement accuracy so the sphere must be temperature controlled. Calibration is done only with no attenuator on the photodiode. We recommend purging the inside of the sphere to avoid potential photo contamination with UV illumination.

feature
Calibration Uncertainty without Attenuator 4% @ 200-250 nm2.5% @ 251 - 950 nm5% 951 - 1100 nm
Connector Type DB15
Detector Type Sphere Detector
Input Port Size 0.5 in.
Material UV-Enhanced Silicon
Power Range 100 nW - 100 mW @ 350 nm
Sensor Size Ø11.3 mm
Spectral Range 200 - 1100 nm
Sphere Size 2 in.

Write a review