Menu
Menu
Your Cart

PbS Photodiode, 3 x 3 mm, 700-3000 nm, Supply and AC Coupled Pre-amplifier

PbS Photodiode, 3 x 3 mm, 700-3000 nm, Supply and AC Coupled Pre-amplifier
PbS Photodiode, 3 x 3 mm, 700-3000 nm, Supply and AC Coupled Pre-amplifier
PbS Photodiode, 3 x 3 mm, 700-3000 nm, Supply and AC Coupled Pre-amplifier
PbS Photodiode, 3 x 3 mm, 700-3000 nm, Supply and AC Coupled Pre-amplifier
PbS Photodiode, 3 x 3 mm, 700-3000 nm, Supply and AC Coupled Pre-amplifier
PbS Photodiode, 3 x 3 mm, 700-3000 nm, Supply and AC Coupled Pre-amplifier
PbS Photodiode, 3 x 3 mm, 700-3000 nm, Supply and AC Coupled Pre-amplifier
PbS Photodiode, 3 x 3 mm, 700-3000 nm, Supply and AC Coupled Pre-amplifier
PbS Photodiode, 3 x 3 mm, 700-3000 nm, Supply and AC Coupled Pre-amplifier
PbS Photodiode, 3 x 3 mm, 700-3000 nm, Supply and AC Coupled Pre-amplifier
PbS Photodiode, 3 x 3 mm, 700-3000 nm, Supply and AC Coupled Pre-amplifier
  • Brand:
  • Product Code: DET-L-PBS-R-U
$1,892.00
Ex Tax: $1,892.00

Available Options

The DET-L-PBS-R-U detector for LIDA™ houses a Lead sulfide detector w/integrated voltage supply and AC coupled pre-amplifier. The integrated power supply provides a 100 V bias of the PbS detector and the pre-amplifier allows for adjustable gains of x2, x10, and x50 with up to 8 kHz bandwidth capability. Wavelengths from 0.7 to 3 μm can be detected.

To supply the required voltage input, consider the 70703 or 70709 Laboratory Power Supply. This is a simple, low cost laboratory power supply capable of supplying the required +5 V to power the built-in bias supply and ± 15 V to power the integrated pre-amplifier of the DET-L-PBS-R-U.

feature
Amplified 2 V/A, 10 V/A, 50 V/A
Bandwidth 10 Hz-8 kHz
Bias Voltage 100 V
Connector Type BNC (signal), LIDATM
Dimensions 52.3 x 52.3 x 127.0 mm
Power Requirements ±5 to ±15 VDC
Sensor Size 3 x 3 mm
Spectral Range 700-3000 nm
TE Cooled No
Type PbS Photodiode

Write a review