Available Options
The 918D-IS-IG Fiber Optic Detector uses a symmetrical integrating sphere design to ensure the most accurate calibration possible, regardless of the fiber type measured. The 918D-IS-IG uses a single InGaAs detector and is calibrated over the range of 800-1650 nm. The calibration data is encoded in a calibration module integral to the electrical connector. The 918D-IS-IG has an integral DB15 connector and is compatible with Newport's new power meters. Maximum versatility is provided by the detector’s dual port design. A variety of adaptors for connector-terminated fibers are provided, and plug into the detector’s front port. The rear port is designed to measure light from straight and angle cleaved bare fibers, using Newport’s FP3-FH1 bare fiber holder. A complete kit of adaptors, including the FP3-FH1, is included with each detector, together with a rugged carrying case.
feature | |
Calibration Uncertainty without Attenuator | 3% @ 800-1650 nm |
Connector Type | DB15 |
Detector Type | Fiber Optic |
Material | Indium Gallium Arsenide |
Maximum Measurable Power | 30 W/cm2 |
Maximum Power Density | 30.0 |
Maximum Pulse Energy Without Attenuator | 100 µJ |
Operating Temperature Range | 5 to 50°C, <70% RH |
Power Range | 1 nW - 200 mW |
Rise Time | ≤2 µs |
RoHS | Compliant |
Spectral Range | 800 - 1650 nm |
Sphere Size | 1 in. |