The 918D-SL-OD1R Silicon Photodetector for low optical power measurements. Features include integrated calibration-data storage, built-in OD1 attenuation filter with automatic On/Off detection, and temperature sensing electronics for temperature drift compensation. Silicon (Si) photodetector NIST-t..
$656.00
Ex Tax:$656.00
The 918D-SL-OD2R Silicon Photodetector for low optical power measurements. Features include integrated calibration-data storage, built-in OD2 attenuation filter with automatic On/Off detection, and temperature sensing electronics for temperature drift compensation. Silicon (Si) photodetector NIST-t..
$709.00
Ex Tax:$709.00
The 918D-SL-OD3R Silicon Photodetector for low optical power measurements. Features include integrated calibration-data storage, built-in OD3 attenuation filter with automatic On/Off detection, and temperature sensing electronics for temperature drift compensation. Silicon (Si) photodetector NIST-t..
$600.00
Ex Tax:$600.00
The FP3-SMA Fiber Connector Adapters accommodates optical fibers terminated with SMA connectors. The adapters are attached to the 818-FA Fiber Adapter Mount with two screws, allowing for easier insertion and unplugging of fiber optic connectors. Please note that Newport does not calibrate the detec..
$75.00
Ex Tax:$75.00
The 884-SMA Fiber Adapter accommodates optical fibers terminated with SMA connectors. The adapter is directly screwed on the detector head or on the 884 Series attenuator. It can be used as an accessory to any of the Newport 818-xx-L, 818, 918D Series Low-Power Photodetectors, and legacy 918 Serie..
$49.00
Ex Tax:$49.00
Order 818-SCAL-OPT when you need to order a spare calibration module only, for 818 Series photodiode detectors, without recalibration of the detector. For example, order this part when you want to upgrade 818-XX to 818-XX/DB, or 818-XX/CM to 818-XX/DB or vice versa, or when the calibration module is..
$0.00
Ex Tax:$0.00
The FP4-ST Fiber Connector Adapter accommodates optical fibers terminated with ST connectors. The adapters are attached to the 818-FA Fiber Adapter Mount with two screws, allowing for easier insertion and unplugging of fiber optic connectors. Please note that Newport does not calibrate the detectors..
$86.00
Ex Tax:$86.00
The 918D-IS-SL Fiber Optic Detector uses a symmetrical integrating sphere design to ensure the most accurate calibration possible, regardless of the fiber type measured. The 918D-IS-SL uses a single Silicon detector and is calibrated over the range of 410-1100 nm. The calibration data is encoded in ..
$2,106.00
Ex Tax:$2,106.00
The 918D-IS-1 Universal Fiber Optic Detector uses a symmetrical integrating sphere design to ensure the most accurate calibration possible regardless of the fiber type measured. The integrating sphere uses a novel dual detector design with special optics that improve temperature sensitivity markedly..
$2,868.00
Ex Tax:$2,868.00
The 918D-IS-IG Fiber Optic Detector uses a symmetrical integrating sphere design to ensure the most accurate calibration possible, regardless of the fiber type measured. The 918D-IS-IG uses a single InGaAs detector and is calibrated over the range of 800-1650 nm. The calibration data is encoded in a..
$2,251.00
Ex Tax:$2,251.00
The 884-UDAPT is an adapter with an Oriel's 1.5 inch series female flange and for Newport's 1 inch LensTube lens holders (1.035-40 thread).Compatible with the following photodiode detectors: 818-xx-L, 818, 918D Series Low-Power Photodetectors, and legacy 918 Series detectors...
$54.00
Ex Tax:$54.00
The 818-UV/DB Low-Power UV Enhanced Silicon Photodetector is supplied with a NIST traced calibration report that details individual detector responsivity measured with and without attenuator. Exclusive OD3 attenuator technology extends the calibrated optical dynamic range of our photodiode sensor he..
$600.00
Ex Tax:$600.00