The 819D-IG-5.3-CAL is a NIST traceable calibrated integrating sphere detector using a 5.3 inch integrating sphere with a high performance InGaAs photodetector. The input port size is 0.5 in. diameter and the wavelength range is 930 – 1650 nm. It comes with an SMA fiber optic connector on the North ..
$412.00
Ex Tax:$412.00
The FP4-LC Fiber Connector Adapter accommodates optical fibers terminated with LC connectors. The adapters are attached to the 818-FA Fiber Adapter Mount with two screws, allowing for easier insertion and unplugging of fiber optic connectors. Please note that Newport does not calibrate the detectors..
$151.00
Ex Tax:$151.00
The all new FP4-COL-1550 Fiber Adapter Core collimates the laser beam from a fiber tip so that the beam does not overfill the active area of the 818 and 918D series IR and IG detectors. It employs a 1.8 mm diameter graded index lens with an AR coating between 1250 to 1650 nm. This part is inserted..
$247.00
Ex Tax:$247.00
The DET-L-PYC5-R-P detector for LIDA™ houses a lithium tantalate pyroelectric detector with an integrated FET amplifier and signal processing circuitry. Typical pyroelectric detectors have an output which decreases with increasing chopping frequency. The signal processing circuitry following the l..
$148.00
Ex Tax:$148.00
The DET-L-PYK5-R-P detector for LIDA™ houses a lithium tantalate pyroelectric detector with an integrated FET amplifier and signal processing circuitry. Typical pyroelectric detectors have an output which decreases with increasing chopping frequency. The signal processing circuitry following the l..
$1,632.00
Ex Tax:$1,632.00
The 884-IGR OD3 Attenuator is a stackable OD3 attenuator that can be mounted to an 818-IG series detector to attenuate the input beam. It is the RoHS compliant version of legacy 883-IG and 884-IG. The clear aperture is 10.3 mm. Note that one attenuator is already included and calibrated in the 818-I..
$129.00
Ex Tax:$129.00
The 884-IRR OD3 Attenuator is a stackable OD3 attenuator that can be mounted to an 818-IR series detector to attenuate the input beam. It is the RoHS compliant version of legacy 883-IR and 884-IR. The clear aperture is 10.3 mm. Note that one attenuator is already included and calibrated in the 818-I..
$129.00
Ex Tax:$129.00
The 884-SLR OD3 Attenuator is a stackable OD3 attenuator that can be mounted to an 818-SL series detector to attenuate the input beam. It is the RoHS compliant version of obsolete 883-SL and 884-SL. The clear aperture is 10.3 mm. Note that one attenuator is already included and calibrated in the 818..
$158.00
Ex Tax:$158.00
The 884-UVR OD3 Attenuator is a stackable OD3 attenuator that can be mounted to an 818-UV series detector to attenuate the input beam. It is the RoHS compliant version of legacy 883-UV and 884-UV. The clear aperture is 10.3 mm. Note that one attenuator is already included and calibrated in the 818-U..
$129.00
Ex Tax:$129.00
The DET-L-PBS-R-U detector for LIDA™ houses a Lead sulfide detector w/integrated voltage supply and AC coupled pre-amplifier. The integrated power supply provides a 100 V bias of the PbS detector and the pre-amplifier allows for adjustable gains of x2, x10, and x50 with up to 8 kHz bandwidth capabi..
$1,892.00
Ex Tax:$1,892.00
The FP4-SC Fiber Connector Adapter accommodates optical fibers terminated with SC connectors. The adapters are attached to the 818-FA Fiber Adapter Mount with two screws, allowing for easier insertion and unplugging of fiber optic connectors. Please note that Newport does not calibrate the detector..
$131.00
Ex Tax:$131.00
The 818-SL/DB Silicon (Si) Photodetector is supplied with a NIST traced calibration report that details individual detector responsivity measured with and without attenuator. Exclusive OD3 attenuator technology extends the calibrated optical dynamic range of our photodiode sensor heads by three deca..
$534.00
Ex Tax:$534.00