The 884-E2000FC Fiber Adapter accommodates optical fibers terminated with the Diamond’s E-2000TM PC fiber connectors. The adapter is directly screwed on the detector head or on the 884 Series attenuator. It is compatible with the Newport 818-xx-L, 818, 918D Series Low-Power Photodetectors, and..
$240.00
Ex Tax:$240.00
The AO271 FC Fiber Optic Connector Adapter accommodates optical fibers terminated with FC connectors. The AO271 is compatible with the following ILX Lightwave optical power meter measurements heads: OMH-6703B, OMH-6708B, OMH-6727B, OMH-6742B...
$227.00
Ex Tax:$227.00
The CA-100 FC Fiber Optic Connector Adapter accommodates optical fibers terminated with FC connectors. The CA-100 is compatible with the following ILX Lightwave optical power and fiber optic power meter measurements heads: FMH-8705, FMH-8715, FMH-87107, OMH-6790B...
$239.00
Ex Tax:$239.00
The FP4-FC Fiber Connector Adapter accommodates optical fibers terminated with FC connectors. The adapters are attached to the 818-FA Fiber Adapter Mount with two screws, allowing for easier insertion and unplugging of fiber optic connectors. Please note that Newport does not calibrate the detector..
$76.00
Ex Tax:$76.00
The 819M-FC-0.5 Fiber Adaptor is a FC fiber adapter that connects to a 1/2 inch port on a 819C or 819D Series integrating sphere. Flat Black coating on the back of the adapter, which simulates an open port...
$220.00
Ex Tax:$220.00
The 819M-FC-1.0 Fiber Adaptor is a FC fiber adapter that connects to a 1 inch port on a 819C or 819D Series integrating sphere. Flat Black coating is applied on the back side. Flat black coating is to minimize the reflection from the back surface of the component back into the sphere, to simulate a..
$239.00
Ex Tax:$239.00
The 884-FCA Fiber Adapter accommodates optical fibers terminated with FC/APC connectors. The adapter is directly screwed on the detector head or on the 884 Series attenuator. The fiber connector is machined at an angle so that the light coming out from the fiber tip is perpendicular to the detecto..
$56.00
Ex Tax:$56.00
The 884-FC Fiber Adapter accommodates optical fibers terminated with FC/PC connectors. The adapter is directly screwed on the detector head or on the 884 Series attenuator. The typical distance from the fiber ferrule tip to the detector surface is approximately 4.57 mm (0.18 in.) for -SL and -UV d..
$49.00
Ex Tax:$49.00
The 919P-FC Fiber Adapter accommodates optical fibers terminated with FC/PC connectors for 919P series thermopile detectors. It has an M20X1 thread. Use it along with the various diameter adapter mounting ring models, such as 919P-18FA, -26FA, -35FA, or -50 FA. Cannot be used with 919P-020-12...
$154.00
Ex Tax:$154.00
The 2153 Femtowatt InGaAs Photoreceiver is ideal when you need the ultimate in low-light-level detection in the 800 to 1700 nm range. When used with a chopper and a lock-in amplifier, these receivers can easily achieve sensitivity levels in the femtowatt range. These receivers provide amazing amount..
$978.00
Ex Tax:$978.00
The 2151 Femtowatt Silicon Photoreceiver is ideal when you need the ultimate in low-light-level detection in the 300 to 1050 nm range. When used with a chopper and a lock-in amplifier, these receivers can easily achieve sensitivity levels in the femtowatt range. These receivers provide amazing amoun..
$919.00
Ex Tax:$919.00
The 919P-50FA Fiber Adapter Mounting Ring accommodates the 919P-FC or 919P-SMA fiber adapter to the model...
$101.00
Ex Tax:$101.00