The 819C-SF-4 Integrating Sphere is a 4 inch, Spectraflect coated, 4-port integrating sphere. Its damage threshold is 1.7 J/cm2. The port at 90° is used for the user selectable detector. The port at 180° is for the incoming collimated beam. The port at the North Pole location (top) is for fiber op..
$172.00
Ex Tax:$172.00
The 819C-GL-4 is a 4 inch, gold coated, 4-port integrating sphere. The gold coated spheres are optimized to provide high level of diffuse reflectance from 800 nm to 20 um (>90% at 800 nm,> 94% at 1550 nm) . Its damage threshold is 19.7 J/cm2, which is 4 times greater than Spectralon. The port at ..
$2,245.00
Ex Tax:$2,245.00
The 819D-IS-5.3 Integrating Sphere is our new 5.3 inch, PTFE based, 4-port integrating sphere, replacing the 3-port 819D-SL-5.3. Its damage threshold is 5.0 J/cm2. The diameter of the 0° port is 2.5 inch, but the sphere comes with a 1 inch port frame reducer pre-mounted. The 180° port comes with a 1..
$2,558.00
Ex Tax:$2,558.00
The 819C-IS-5.3 Integrating Sphere is a 5.3 inch, PTFE based, 4-port integrating sphere. It replaces 819C-SL-5.3. The port at 180° used for beam input (direct or with fiber adapter). The diameter of the 0° port is 2.5 inch, but the sphere comes with a port plug pre-mounted. The port at 90° is used f..
$2,582.00
Ex Tax:$2,582.00
The 819C-SF-6 Integrating Sphere is a 6 inch, Spectraflect coated, 4-port integrating sphere. Its damage threshold is 1.7 J/cm2. The port at 90° is used for the user selectable detector. The port at 180° is for the incoming collimated beam. The port at the North Pole location (top) is for fiber op..
$1,826.00
Ex Tax:$1,826.00
The 819C-GL-6 is a 6 inch, gold coated, 4-port integrating sphere. The gold coated spheres are optimized to provide high level of diffuse reflectance from 800 nm to 20 um (>90% at 800 nm,> 94% at 1550 nm) . Its damage threshold is 19.7 J/cm2, which is 4 times greater than Spectralon. The port at ..
$3,678.00
Ex Tax:$3,678.00
The 1227 40-GHz Flexible Cable gives you high performance at a reasonable cost. This 24 inch cable has a male Wiltron K connector on one end and a female Wiltron K connector at the other end...
$624.00
Ex Tax:$624.00
The 818-ST2-IR/DB is a brand new thin-profile, wand IR detector with a sturdy metal housing. Incorporating a large area 10 mm X 10 mm Ge photodiode, this slim optical sensor is ideal for laser and other optical power measurements in tight locations with busy setups. It even provides a built-in calib..
$667.00
Ex Tax:$667.00
The 818-ST2/DB is a newly redesigned thin-profile, wand detector with a sturdy metal housing. Incorporating a large area 10 mm X 10 mm Si photodiode, this slim optical sensor is ideal for laser and other optical power measurements in tight locations with busy setups. It even provides a built-in cali..
$667.00
Ex Tax:$667.00
The 818-ST2-UV/DB is a thin-profile, wand detector with a sturdy metal housing. Incorporating a large area 10 mm X 10 mm UV Enhanced Silicon (Si) photodiode, this slim optical sensor is ideal for laser and other optical power measurements in tight locations with busy setups. It even provides a built..
$916.00
Ex Tax:$916.00
The 819M-DAT Detector Adaptor is used to attach an 818, 918 or 918D Series detector to the 1 inch port of an 819C/D Series integrating sphere. Screw the adapter on the detector and then mount the assembly on the port. In general, the detector should be mounted at a port where it does not directly ..
$259.00
Ex Tax:$259.00
The 918D-ST-IR is a newly redesigned thin-profile, wand detector with a sturdy metal housing. Features include integrated calibration-data storage, built-in OD3 attenuation filter with automatic On/Off detection, and temperature sensing electronics for temperature drift compensation. use the atten..
$947.00
Ex Tax:$947.00