Available Options
The 818-BB-21 High Speed Silicon Optical Detector consists of a free-space 300 to 1100 nm Battery Biased Silicon detector with a 0.40 mm active diameter and a <300 ps rise time. It includes a built-in bias supply consisting of three standard 3 V lithium cells (9 V total bias) and a 50 ohm BNC connector output. The batteries are easily replaceable and by disconnecting the detector from the oscilloscope input, when not in use, you can extend the lifetime of the batteries. 818-BB Series Biased Photodiode Detectors are cost effective diagnostic tools suitable for a variety of high speed applications such as viewing of Q-switched, mode-locked, or rapidly modulated laser signals and picosecond laser alignment.
NOTE-These detectors are very susceptible to damage by electrostatic discharge (ESD). Please use ESD protective measures, like the FK-STRAP, when unpacking and handling these devices.
The 818-BB-21 is a replacement for the 818-BB-20 which is no longer offered.
feature | |
Acceptance Angle | 10° |
Active Area | 0.4 mm² |
Amplified | No |
Bandwidth | >1.2 GHz |
Bias Voltage | 9 V |
Cut-off Frequency | 1.2 GHz |
Dark Current | <0.1 nA |
Detector Material | Silicon |
Detector Type | PIN |
Fall Time | <300 ps |
Junction Capacitance | <1.5 pF |
Measurement Type | Beam shape, frequency |
NEP | <0.01 pW/√Hz |
Optical Input | Free Space |
Output Connector | BNC |
Responsivity | 0.47 A/W @ 830 nm |
Reverse Breakdown | 20 V |
Rise Time | <300 ps |
Saturation Current | 3 mA |
Thread Type | 8-32 and M4 |
Wavelength Range | 300-1100 nm |