Fiber-Optic Detector, 500-1630 nm, 25 GHz, FC Singlemode
$4,385.00
Ex Tax: $4,385.00
Available Options
The 1414 High Speed Fiber-Optic Detector shows a flat response in both amplitude and phase up to 25 GHz and are optimized for frequency-domain applications. This near-IR photodetector uses a 25 μm diameter back-illuminated InGaAs Schottky photodiode with peak responsivities of 0.6 A/W at 1300 nm. The active layer is twice as thick as in our ultrahigh-speed Model 101X module, producing a 50% greater responsivity over its 500 to 1630 nm wavelength range. The conversion gain with a 50 Ω load is 17 V/W. It has a FC single-mode input and Wiltron K electrical output. The detector uses a internal 9-V battery.
feature | |
3 dB Bandwidth | DC to 25 GHz |
DC Bias Monitor Bandwidth | 50 kHz |
DC Bias Monitor Transimpedance Gain | 1 V/mA |
Detector Diameter | 21 µm |
Detector Material | InGaAs |
Detector Type | Schottky |
Fiber Type | Singlemode |
Fiber-Optic Connector | FC/UPC |
Maximum Conversion Gain | 17 V/W |
NEP | 30 pW/√Hz |
Output Connector | Wiltron K |
Output Impedance | 50 Ω |
Power Requirements | Internal 9-V battery |
Responsivity | 0.7 A/W |
Rise Time | 14 ps |
Saturation Power | 2 mW |
Wavelength Range | 500-1630 nm |