Adjustable Fiber-Optic Receiver, 900-1700 nm InGaAs Detector, 10 MHz, 8-32 Thread
$1,145.00
Ex Tax: $1,145.00
Available Options
The 2053-FC Adjustable InGaAs Fiber-Optic Receiver is based on our popular Model 2001 photoreceivers. This higher speed FC optical input model features low-noise 900 to 1700 nm InGaAs detectors, variable-gain trans impedance amplifiers, and two adjustable filters. The DC/30 setting prevents your signal from going off-scale due to DC amplitude fluctuations, without attenuating fast signals. The high-pass filter can be adjusted to eliminate residual 60 Hz noise, and the independent low-pass filter can be set to dampen noisy signals. Variable gain of up to 90 dB in 10-dB steps gives you a useful input range from 1 pW to 10 mW. 8-32 mounting thread.
feature | |
3 dB Bandwidth | 10 MHz, 5 MHz, 150 kHz |
Detector Diameter | 0.3 mm |
Detector Material | InGaAs |
Detector Type | PIN |
Fiber Type | SM or MM |
Fiber-Optic Connector | FC/UPC |
Maximum Conversion Gain | 18.4x106 V/W |
Maximum Transimpedance Gain | 18.4x106 V/A |
NEP | 0.34 pW/√Hz |
Output Connector | SMA |
Output Impedance | 16 Ω |
Peak Responsivity | 1.0 A/W |
Power Requirements | ±15 VDC or 9-V Battery |
Rise Time | 80 ns |
Saturation Power | 10 mW @ 1600 nm |
Thread Type | 8-32 |
Wavelength Range | 900-1700 nm |