Fiber-Optic Receiver, 900-1700 nm InGaAs Detector, 200 kHz Bandwidth, FC/PC, M4
$1,154.00
Ex Tax: $1,154.00
Available Options
The 2011FC-M Fiber-Optic Receiver features a low-noise InGaAs detectors, variable-gain trans impedance amplifiers, and two adjustable filters. It offers a wavelength range of 900 to 1700 nm and FC/PC connector optical input. The DC÷30 setting prevents your signal from going off-scale due to DC amplitude fluctuations, without attenuating fast signals. The high-pass filter can be adjusted to eliminate residual 60 Hz noise, and the independent low-pass filter can be set to dampen noisy signals. Variable gain of up to 90 dB in 10-dB steps gives you a useful input range from 1 pW to 10 mW. M4 mounting thread.
feature | |
3 dB Bandwidth | DC to 200 kHz |
Detector Diameter | 0.3 mm |
Detector Material | InGaAs |
Detector Type | PIN |
Fiber-Optic Connector | FC/UPC |
Maximum Conversion Gain | 18.8x106 V/W |
Maximum Transimpedance Gain | 18.8x106 V/A |
NEP | 0.19 pW/√Hz |
Output Connector | SMA |
Output Impedance | 16 Ω |
Peak Responsivity | 1.0 A/W |
Power Requirements | Two internal 9V batteries |
Rise Time | 2 µs |
Saturation Power | 10 mW @ 1600 nm |
Thread Type | M4 |
Wavelength Range | 900-1700 nm |