The AS-1568 Accessory Shelf mounts below the work table for out of the way storage of bulky items like lasers and power supplies. Designed with robust, two-inch thick honeycomb paneling, covered by steel on all sides, the shelf is non-resonant. In fact, it’s guaranteed not to degrade table per..
$0.00
Ex Tax:$0.00
The Model ARF Air Regulator/Filter removes contaminants from the air and regulates it to the optimum pressure for operation of the isolation system. This is important since compressed air plumbed from a central facility usually contains water and rust particles that can clog an isolation system. One..
$0.00
Ex Tax:$0.00
The 41481 is a replacement Leveling Arm Assembly..
$0.00
Ex Tax:$0.00
The 3010-188 is a replacement Ball Bearing for a IPV Leveling Arm..
$0.00
Ex Tax:$0.00
The ATS-CMS Cable Management System works with ATS Series overhead table shelf systems...
$0.00
Ex Tax:$0.00
The 6277-01-04 Clear Plastic Tubing is clear with 1/4 inch outside diameter. Order by the foot with a 5 foot minimum...
$0.00
Ex Tax:$0.00
The 4190 Damping Oil is a small bottle with enough damping oil for one I-2000 isolator...
$0.00
Ex Tax:$0.00
The ERS2010-1-KT-A Earthquake restraint mounting kit includes hardware and epoxy needed to install 1 earthquake restraint. This hardware kit consists of 1 ea. HILTI HIT-RE 500-SD Epoxy Adhesive, 8 ea. HILTI HIS 3/8" Threaded sleeve, 8 ea. Hex bolts 3/8", 8 ea. Washers for 3/8" bolts, and 1 ea. HILT..
$0.00
Ex Tax:$0.00
The ERS2010-1-KT-B Earthquake restraint mounting kit includes hardware needed to install 1 earthquake restraint. This hardware kit consists of 8 ea. HILTI HIS 3/8" Threaded sleeve, 8 ea. Hex bolts 3/8", and 8 ea. Washers for 3/8" bolts. Epoxy adhesive is not included in this kit...
$0.00
Ex Tax:$0.00
The 13801 Elbow Connector is used for connecting the air input to an S-2000 or I-2000 Isolator. 1/8-NPT thread...
$0.00
Ex Tax:$0.00
The MD2500 is suitable for use with both 11.1 and 16.5 cartridges of HY 20, HY 150 and RE 500. Easy to load and easy to use, the MD 2500 Dispenser will help you complete your adhesive anchoring jobs quickly and thoroughly. It can be used with two sizes of Hilti anchor adhesive foil packs: 11.1 oz. a..
$0.00
Ex Tax:$0.00
The 16884-01 Plastic Tubing is gray with a 1/8 inch inner diameter, and 85 Durometers. Order by the foot with a five foot minimum...
$0.00
Ex Tax:$0.00