Newport’s DS-4F High-Precision Adjuster is based on a novel principle that provides exceptional resolution with 8 mm travel adequate for most uses. High-resolution and value make this adjuster a suitable alternative for a differential micrometer in cases where the direct linear readout of a mi..
$234.00
Ex Tax:$234.00
The HR-1 Long-Travel High-Resolution Micrometer Head has a sensitivity that is 4X better than most standard micrometer heads. Its engraved scale reads directly in units of 2 μm, and its large knob allows exceptionally sensitive position adjustment. This micrometer is compatible with all axes of a..
$338.00
Ex Tax:$338.00
The HR-13 Lockable High-Resolution Micrometers has 0.25 mm pitch threads (over 100 TPI), providing twice the sensitivity of standard SM Series Micrometers. These fine threads allow 0.5 μm sensitivity with direct position readout in 5 μm graduations. The HR-13 is recommended for applications re..
$121.00
Ex Tax:$121.00
The HR-6 Lockable High-Resolution Micrometers has 0.25 mm pitch threads (over 100 TPI), providing twice the sensitivity of standard SM Series Micrometers. These fine threads allow 0.5 μm sensitivity with direct position readout in 5 μm graduations. The HR-6 is recommended for applications requ..
$145.00
Ex Tax:$145.00
This high-quality micrometer feature a smooth-bore unthreaded mounting shank for use with slip-in, clamp style mounts. The 9351 High-Resolution Micrometer style adjustment screws has 1/4-100 threads to give you finer resolution than conventional micrometers (typically 40-pitch threads). Easy-to-read..
$94.00
Ex Tax:$94.00
The DM-13L Differential Micrometer provides sub-micron positioning combined with a coarse travel of 13 mm. The design incorporates a standard micrometer with a high-resolution micrometer built around it. Coarse positioning, provided by the knob at the end of the micrometer, enables rapid translation..
$504.00
Ex Tax:$504.00
The DM-25L Differential Micrometer provides sub-micron positioning combined with a coarse travel of 25 mm. The design incorporates a standard micrometer with a high-resolution micrometer built around it. Coarse positioning, provided by the knob at the end of the micrometer, enables rapid translation..
$549.00
Ex Tax:$549.00
The DM-6L Differential Micrometer provides sub-micron positioning combined with a coarse travel of 6 mm. The design incorporates a standard micrometer with a high-resolution micrometer built around it. Coarse positioning, provided by the knob at the end of the micrometer, enables rapid translation w..
$420.00
Ex Tax:$420.00
The 9356 Micrometer Head features a smooth-bore unthreaded mounting shank for use with slip-in, clamp style mounts. The 9356 Micrometer is a high-quality 1.0 inch travel micrometer that is ideal for use with our 9063 Series gothic-arch-bearing translation stages. The Model 9354 provides smooth and a..
$80.00
Ex Tax:$80.00
This high-quality micrometer feature a smooth-bore unthreaded mounting shank for use with slip-in, clamp style mounts. The 9354 Micrometer is a high-quality 0.25 inch travel micrometer that is ideal for use with our 9061 Series gothic-arch-bearing translation stages. The Model 9354 provides smooth a..
$85.00
Ex Tax:$85.00
This high-quality micrometer feature a smooth-bore unthreaded mounting shank for use with slip-in, clamp style mounts. The 9355 Micrometer is a high-quality 0.5 inch travel micrometer that is ideal for use with our 9062 Series gothic-arch-bearing translation stages. The Model 9354 provides smooth an..
$85.00
Ex Tax:$85.00
The SM-06 Smooth Bore Micrometer Head is a standard drive for most Newport stages, and our most popular manual actuator. The SM-06 has a 6 mm travel range and a 9 lb load capacity. SM Series micrometers have 0.5 mm pitch (50.8 TPI) threads and read directly in increments of 10 µm...
$87.00
Ex Tax:$87.00