The 3512 Chopper Wheel has 7/5 slots. It is an additional wheel for the Model 3502 Optical Chopper...
$46.00
Ex Tax:$46.00
The 66243 Dichroic Beam Turning Mirror is designed for high reflectance and polarization insensitivity over a limited 190 to 195 nm spectral range. Most of the IR is transmitted through the dichroic mirror and absorbed by the 3 Inch Series model 66247 mirror housing (not included) where a heat sink ..
$581.00
Ex Tax:$581.00
The 66232 Dichroic Beam Turning Mirror is designed for high reflectance and polarization insensitivity over a limited 240 to 255 nm primary spectral range. Most of the IR is transmitted through the dichroic mirror and absorbed by the 2 Inch Series model 66246 mirror housing (not included) where a he..
$445.00
Ex Tax:$445.00
The 66233 Dichroic Beam Turning Mirror is designed for high reflectance and polarization insensitivity over a limited 240 to 255 nm spectral range. Most of the IR is transmitted through the dichroic mirror and absorbed by the 3 Inch Series model 66247 mirror housing (not included) where a heat sink ..
$694.00
Ex Tax:$694.00
The 81045 Dichroic Mirror is useful If you want to block a selected region of the UV, and/or completely block or reduce the VIS and IR. This 280 to 400 nm Dichroic Mirror mounts in the 66245 Dichroic Mirror Holder...
$286.00
Ex Tax:$286.00
The 68950 is a Digital Exposure System for Research Lamp Sources. The system is a light intensity controller and digital timer in one. The light intensity controller maintains a constant light output level from an arc, deuterium, or quartz tungsten halogen lamp, whereas the digital timer enables tim..
$2,668.00
Ex Tax:$2,668.00
The 71445 Electronic Safety Shutter consists of a 1.5 Inch Series flanged enclosure that houses the blade, and a stand-alone shutter drive for 115 and 220 V operation. The enclosure has a female-flange on one end and a male-flange on the other. The male end couples directly to the light source conde..
$1,246.00
Ex Tax:$1,246.00
The 71446 Electronic Safety Shutter consists of a 2 Inch Series flanged enclosure that houses the blade, and a stand-alone shutter drive for 115 and 220 V operation. The enclosure has a female-flange on one end and a male-flange on the other. The male end couples directly to the light source condens..
$148.00
Ex Tax:$148.00
The 76995 Electronic Shutter Driver is required to operate Oriel fast shutters. You must provide TTL pulses, from a Computer (RS 232 interface), from the 68945 Digital Timer, or another source. The 76995 enables the shutters to function as normally open or normally closed, and has three modes of ope..
$2,082.00
Ex Tax:$2,082.00
The 76993 is useful for detector protection and gating at frequencies of up to 40 Hz in burst mode. Burst frequency rating is specified for four seconds maximum with one minute minimum between bursts. In continuous mode (defined as the shutter minimum exposure pulse), the shutter operates at 10 Hz. ..
$1,892.00
Ex Tax:$1,892.00
The 76994 is useful for detector protection and gating at frequencies of up to 40 Hz in burst mode. Burst frequency rating is specified for four seconds maximum with one minute minimum between bursts. In continuous mode (defined as the shutter minimum exposure pulse), the shutter operates at 10 Hz. ..
$2,087.00
Ex Tax:$2,087.00
The 76992 is especially suited to laser or focal plane use and applications including beam modulation at frequencies up to 150 Hz in burst mode. Burst frequency rating is specified for four seconds maximum with one minute minimum between bursts. In continuous mode (defined as the shutter minimum exp..
$1,796.00
Ex Tax:$1,796.00