The LDM-4442 solves the fixturing and heat dissipation problems associated with operating higher power laser diodes. This laboratory-quality laser diode mount has the ability to dissipate up to 18W of heat generated by a laser diode and its internal thermoelectric modules. The LDM4442 laser mounting..
$896.00
Ex Tax:$896.00
The LPB-386 is a laser pulse board designed to work with the LDP-3830 Pulsed Laser Diode Driver and connected via the CC385 Pulsed Output Source/Laser Mount Interconnect cable. To achieve the rated performance of the LDP-3830, the CC385 and LPB386 must be used with it.Impedance matching is not avail..
$967.00
Ex Tax:$967.00
The LPB-380 is a laser pulse board designed to work with the LDP-3840B Pulsed Laser Diode Driver and is connected via the CC380 Pulsed Drive to Pulse Board Cable.To achieve the rated performance of the LDP-3840B, the CC380 and LPB380 must be used with it.The LPB-380 has solder pads available to perf..
$195.00
Ex Tax:$195.00
The LNF-320 is a common-mode filter designed to reduce noise on laser diodes driven by ILX Lightwave current sources using the standard 9-pin D-sub connector. The filter is designed to be used in series with the laser cable. A current source is a naturally high output impedance device, resulting in ..
$95.00
Ex Tax:$95.00
The LDC-3916 Modular Mainframe features sixteen channels with thirty two isolated outputs for controlling multiple laser diodes. Modules include current sources with maximum outputs from 500 mA to 3 A, TE (thermoelectric) controller modules with up to 24 W of power and voltage measurement, and contr..
$6,352.00
Ex Tax:$6,352.00
The LDC-3900-120V Modular Mainframe features four channels with eight isolated outputs for controlling multiple laser diodes. Modules include current sources with maximum outputs from 200mA to 8A, TE (thermoelectric) controller modules with up to 32W of power and voltage measurement, and controller ..
$4,327.00
Ex Tax:$4,327.00
The LDC-3900-220V Modular Mainframe features four channels with eight isolated outputs for controlling multiple laser diodes. Modules include current sources with maximum outputs from 200mA to 8A, TE (thermoelectric) controller modules with up to 32W of power and voltage measurement, and controller ..
$4,327.00
Ex Tax:$4,327.00
The LDC-3908 8-Channel Modular Mainframe has all of the same great features as our popular LDC-3916 16-Channel Laser Diode Controller. In fact, modules are interchangeable between the two instruments. The smaller size and lighter weight of the LDC-3908 make it an ideal instrument for smaller channel..
$4,946.00
Ex Tax:$4,946.00
The MB-400 allows any LDM-4980 Series Laser Diode Mount to be bolted to an optical table. The MB-400 is included with all case temperature controlled mounts...
$0.00
Ex Tax:$0.00
The CC-380 is an interconnect cable between the LDP-3840B pulsed laser diode driver and the LPB-380 Laser Mounting Board. This cable was designed as a low characteristic impedance cable specifically for pulsed applications. The resistance of this cable is a 3Ω and is intended to be used with t..
$129.00
Ex Tax:$129.00
The CC385 interconnect cable is specifically designed to connect the LDP-3830 Pulsed Current Source to the LPB-386 pulse board. The impedance of the cable matches the LDP-3830 and the LPB-386 impedance. Together with the LPB-386, the CC385 offers the best possible pulsing performance for the LDP-383..
$301.00
Ex Tax:$301.00
The RTD Temperature Sensor Converter allows an RTD or resistance temperature device to be used as a temperature feedback sensor with ILX Laser Diode Controllers and Temperature Controllers such as the LDT-5525 temperature controller, LDC-3700C Series laser diode controllers, and LDC-3900 modular las..
$355.00
Ex Tax:$355.00