The 76993 is useful for detector protection and gating at frequencies of up to 40 Hz in burst mode. Burst frequency rating is specified for four seconds maximum with one minute minimum between bursts. In continuous mode (defined as the shutter minimum exposure pulse), the shutter operates at 10 Hz. ..
$1,892.00
Ex Tax:$1,892.00
The 76994 is useful for detector protection and gating at frequencies of up to 40 Hz in burst mode. Burst frequency rating is specified for four seconds maximum with one minute minimum between bursts. In continuous mode (defined as the shutter minimum exposure pulse), the shutter operates at 10 Hz. ..
$2,087.00
Ex Tax:$2,087.00
The 76992 is especially suited to laser or focal plane use and applications including beam modulation at frequencies up to 150 Hz in burst mode. Burst frequency rating is specified for four seconds maximum with one minute minimum between bursts. In continuous mode (defined as the shutter minimum exp..
$1,796.00
Ex Tax:$1,796.00
The IRV-HB Headband Accessory for IRV1 and IRV2 Series Infrared Viewer allows for hands-free operation...
$385.00
Ex Tax:$385.00
The 66088-LED-ADAPT optimally couples any 11 mm ferrule terminated fiber to the output of the 66088-LED fiber optic illuminator. A hex wrench is included for easy attachment to an 11 mm ferrule. Once the fiber is installed, coupling the 66088-LED-ADAPT to the 66088-LED is as easy as using the screws..
$87.00
Ex Tax:$87.00
The 77776 Fiber Bundle Focusing Assembly is used to convert a collimated light source into a fiber optic source. All the components necessary to image a source onto the face of a fused silica bundle are contained in a single enclosure - focusing lens, manual shutter and a fiber bundle holder. One en..
$682.00
Ex Tax:$682.00
The 77799 Fiber Bundle Focusing Assembly is used to convert a collimated light source into a fiber optic source. All the components necessary to image a source onto the face of a glass fiber bundle are contained in a single enclosure - focusing lens, manual shutter and a fiber bundle holder. One end..
$371.00
Ex Tax:$371.00
The 77800 Fiber Bundle Focusing Assembly is used to convert a collimated light source into a fiber optic source. All the components necessary to image a source onto the face of a glass fiber bundle are contained in a single enclosure - focusing lens, manual shutter and a fiber bundle holder. One end..
$440.00
Ex Tax:$440.00
The 6058NS Fiber Optic Accessory holds the face of an SMA terminated fiber close to the lamp to collect a portion of the light output for spectral calibration purposes. Mounting rod is not included...
$134.00
Ex Tax:$134.00
The 66088 Fiber Optic Illuminator is a cost effective, 150 Watt Quartz Tungsten Halogen (QTH) light source designed specifically for machine vision lighting. The 66088 features a DC-regulated output, which is stabilized to ±0.5%. Precision regulation is essential for machine vision applications, whe..
$1,045.00
Ex Tax:$1,045.00
The LD-1310-31B Fiber Coupled Laser Diode consists of Fabry-Perot lasers, having a fiber pigtail precisely attached for optimum coupling efficiency. This 1310 nm center wavelength version has a typical 1.5 mW of output power and includes a back facet photodiode. It is compatible with Newport’..
$318.00
Ex Tax:$318.00
The LD-1550-21B Fiber Coupled Laser Diode consists of Fabry-Perot lasers, having a fiber pigtail precisely attached for optimum coupling efficiency. This 1550 nm center wavelength version has a typical 1.5 mW of output power and includes a back facet photodiode. It is compatible with Newport’..
$559.00
Ex Tax:$559.00