Menu
Menu
Filter
Your Cart

Spectroscopy Instruments

The 74076 Triple Grating Assembly is designed for installation into the Oriel Cornerstone 260 monochromators and MS260i imaging spectrographs. This 50 x 50 mm grating comes bonded to a triple grating mount, allowing it to be one of three gratings installed inside the instrument. The grating efficien..
$433.00
Ex Tax:$433.00
The 74073 Triple Grating Assembly is designed for installation into the Oriel Cornerstone 260 monochromators and MS260i imaging spectrographs. This 50 x 50 mm grating comes bonded to a triple grating mount, allowing it to be one of three gratings installed inside the instrument. The grating efficien..
$441.00
Ex Tax:$441.00
The 77989 Triple Grating Assembly is designed for installation into the Oriel Cornerstone 260 monochromators and MS260i imaging spectrographs. This 50 x 50 mm grating comes bonded to a triple grating mount, allowing it to be one of three gratings installed inside the instrument. The grating efficien..
$433.00
Ex Tax:$433.00
The 70677 Uniform Source Integrating Sphere can be placed at the output of a light source and you have an almost perfectly uniform Lambertian, broadband source. Typical radiance uniformity is within 1-2% of the average over the 2 inch (51 mm) diameter exit port as long as the FOV of the imaging syst..
$116.00
Ex Tax:$116.00
The 70678 Uniform Source Integrating Sphere can be placed at the output of a light source and you have an almost perfectly uniform Lambertian, broadband source. Typical radiance uniformity is within 1-2% of the average over the 2 inch (51 mm) diameter exit port as long as the FOV of the imaging syst..
$3,341.00
Ex Tax:$3,341.00
The USFW-100 is a flange mounted filter wheel which holds up to six 1-inch [25.4 mm] diameter filters, sold separately. It may be used as a stand-alone model or it can be integrated with any motorized Oriel monochromator or spectrograph. Select a filter position using commands from the monochromator..
$1,414.00
Ex Tax:$1,414.00
The 45701 is a 2 inch [50.8 mm] square mirror, 6.35 mm thick and optimized for 200 to 10,000 nm. This crown glass broadband mirror uses an AlMgF2 coating to enhance UV reflectance. Surface quality is 80-50, flatness is 1λ. Reflectance is 75% or greater from 200 to 400 nm. The 45701 has a 9.5x..
$111.00
Ex Tax:$111.00
The 77258 Flanged Focusing Lens Assembly is a simple lens holder frequently used for focusing the output of a collimated source onto a monochromator. It features precise 2 mm X and Y adjustments, has a large 1.38 inch (35 mm) clear aperture, and has a 1.5 Inch Series female flange for direct couplin..
$416.00
Ex Tax:$416.00
The 77802 Flanged Fiber Bundle Holder holds and adjusts an Oriel® 11 mm fiber bundle at the input or output of a 1.5 inch series male-flanged Oriel component or instrument. It allows 0.063 inch (1.6 mm) adjustment in the X and Y directions, perpendicular to the optical axis, when the three thumbscre..
$165.00
Ex Tax:$165.00
The 77260 X-Y-Z Focusing Lens Assembly is used for imaging the output of a monochromator onto a detector or fiber. It has an integral filter holder and manual shutter, and a 20 mm clear aperture. The 77260 holds two lenses; one acts as the condenser, collimating light from the source or monochromat..
$1,307.00
Ex Tax:$1,307.00
The 77259 X-Y-Z Focusing Lens Assembly is used to focus a collimated source onto a small target (slit, fiber, cuvette), This lower cost, stripped down version (no integral filter holder and shutter) has a larger clear aperture, 1.3 inch (33 mm), that gives you more than twice the throughput of the 7..
$814.00
Ex Tax:$814.00
Showing 493 to 503 of 503 (42 Pages)
Filter Products