The 819C-GL-4 is a 4 inch, gold coated, 4-port integrating sphere. The gold coated spheres are optimized to provide high level of diffuse reflectance from 800 nm to 20 um (>90% at 800 nm,> 94% at 1550 nm) . Its damage threshold is 19.7 J/cm2, which is 4 times greater than Spectralon. The port at ..
$2,245.00
Ex Tax:$2,245.00
The 819D-IS-5.3 Integrating Sphere is our new 5.3 inch, PTFE based, 4-port integrating sphere, replacing the 3-port 819D-SL-5.3. Its damage threshold is 5.0 J/cm2. The diameter of the 0° port is 2.5 inch, but the sphere comes with a 1 inch port frame reducer pre-mounted. The 180° port comes with a 1..
$2,558.00
Ex Tax:$2,558.00
The 819C-IS-5.3 Integrating Sphere is a 5.3 inch, PTFE based, 4-port integrating sphere. It replaces 819C-SL-5.3. The port at 180° used for beam input (direct or with fiber adapter). The diameter of the 0° port is 2.5 inch, but the sphere comes with a port plug pre-mounted. The port at 90° is used f..
$2,582.00
Ex Tax:$2,582.00
The 819C-SF-6 Integrating Sphere is a 6 inch, Spectraflect coated, 4-port integrating sphere. Its damage threshold is 1.7 J/cm2. The port at 90° is used for the user selectable detector. The port at 180° is for the incoming collimated beam. The port at the North Pole location (top) is for fiber op..
$1,826.00
Ex Tax:$1,826.00
The 819C-GL-6 is a 6 inch, gold coated, 4-port integrating sphere. The gold coated spheres are optimized to provide high level of diffuse reflectance from 800 nm to 20 um (>90% at 800 nm,> 94% at 1550 nm) . Its damage threshold is 19.7 J/cm2, which is 4 times greater than Spectralon. The port at ..
$3,678.00
Ex Tax:$3,678.00
The 819M-DAT Detector Adaptor is used to attach an 818, 918 or 918D Series detector to the 1 inch port of an 819C/D Series integrating sphere. Screw the adapter on the detector and then mount the assembly on the port. In general, the detector should be mounted at a port where it does not directly ..
$259.00
Ex Tax:$259.00
The 819M-BASE Base Plate is used to mount 819C or 819D Series integrating spheres. Its dimensions are 6 x 6 x 0.40 inch. It features 4 holes for ¼-20 screws with 5 inches apart for the Imperial breadboard pattern, 4 holes for M6 screws with 100 mm apart for the metric breadboard pattern, and ..
$128.00
Ex Tax:$128.00
The 819-DA Detector Adapter allows 818 Series Detectors to be connected to a 1 inch port of an 819 Series Integrating Sphere...
$91.00
Ex Tax:$91.00
The 819M-FC-0.5 Fiber Adaptor is a FC fiber adapter that connects to a 1/2 inch port on a 819C or 819D Series integrating sphere. Flat Black coating on the back of the adapter, which simulates an open port...
$220.00
Ex Tax:$220.00
The 819M-FC-1.0 Fiber Adaptor is a FC fiber adapter that connects to a 1 inch port on a 819C or 819D Series integrating sphere. Flat Black coating is applied on the back side. Flat black coating is to minimize the reflection from the back surface of the component back into the sphere, to simulate a..
$239.00
Ex Tax:$239.00
The 819M-CM-1.0 is a female C-mount (1-32 thread) adapter mounted to the 1 inch port of the 819C or 819D series integrating spheres. The C-mount thread is commonly adopted in cameras and other optical instruments...
$252.00
Ex Tax:$252.00
The 819M-B-11-1.0 is a C-mount (1-32 UN 2A) male adpater. It has a clear aperture of 11 mm, and inside the adapter has a barium sulfate coating...
$271.00
Ex Tax:$271.00